Sick - Page 13 of 15 - Công ty Thiết bị công nghiệp và Tự động hóa AUMI

Pitot tube

A Pitot tube flow velocity measuring device
The SMC222 series Pitot tube flow velocity measuring device is suitable for measuring the flow of steam, air, and other such mediums
Provides users with a standard 4 ... 20 mA output proportional to the flow rate
Online measurement of industrial boiler fuel gas emissions
Managing flow rate of mediums such as steam or air, especially useful for measuring flow rate in large-diameter ducts

In-situ gas analyzers

In-situ gas analyzers GM32
The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3
No gas sampling, no gas transport, no gas conditioning
Up to eight measuring components at the same time, plus process temperature and pressure
DOAS and CDE evaluation process
Numerous independent measuring ranges with consistent accuracy
Automatic self-test function (QAL3) without test gases
Overpressure encapsulated design for ATEX Zones 1 and 2
For monitoring and control in flue gas purification,such as denitrification plants, desulfurization plants and converters
Emissions monitoring according to EU directives or local regulations
TRS emissions monitoring in the Kraft pulp industry.

In-situ gas analyzers

In-situ gas analyzers GM35
Simultaneous or as individual measurement: the GM35 gas analyzer measures CO2, H2O and CO, or N2O, as well temperature and pressure
No gas sampling and conditioning
Gas testable version of measuring probe available
Emission monitoring according to EN 14181, e. g., in power or cement plants
Monitoring of the combustion efficiency in hazardous waste incineration
Process monitoring in urea production

In-situ gas analyzers

In-situ gas analyzers Zirkor200
SICK’s ZIRKOR200 gas analyzer provides very robust, reliable, and suitability-tested oxygen measurement for small and large combustion plants
Electrochemical cell with extremely long service life due to innovative protection mechanisms
Fully automated adjustment mechanism integrated into the control unit
ZIRKOR remote app for remote access to the analyzer
Suitability-tested according to EN 15267
Ex version for ATEX/IECEx, Zone 1 and Zone 21
Oxygen monitoring for process control
Monitoring of inert gas atmospheres

In-situ gas analyzers

In-situ gas analyzers GM700
The GM700 is able to measure several gas components, such as NH3, HF, HCl or H2O
High selectivity due to high spectral resolution
Overpressure encapsulated design for ATEX Zone 2
Ammonia slip measurement in DeNOx plants
Emission monitoring of hydrogen fluoride in aluminum smelters
Ammonia measurement in exhaust gas of combustion engines
Ammonia measurement in composting or waste incineration plants
HCI measurement in combustion plants

Cold-dry Extractive gas analyzers

Extractive gas analyzers GMS800
Measured values: Ar, CH4, CH3OH, C2H2, C2H2F4, C2H4, C3H6, C3H8, C4H6, Cl2, CO, CO2, COCl2, COS, CS2, H2, H2S, He, NH3, NO, N2O, NO2, O2, SF6, SO2, other components on request
Emission monitoring according to EN 15267 and process gas measurements, including in potentially explosive atmospheres
Emission monitoring of very low concentrations
Measurement of smallest concentrations of NO, NO2, and SO2
NOx monitoring by direct measurement of NO and NO2
Measurement of sulfur compounds in process gases
CO monitoring for explosion protection
Measurement of smallest concentrations in hydrogen or hydrocarbons

Cold-dry Extractive gas analyzers

Extractive gas analyzers S700
Measured values: Ar, CBrF3, CClF3, CCl2F2, CCl3F, CHClF2, CHCl3, CH2Cl2, CH2O, CH3Cl, CH3OH, (CH3)2O, CH4, CO, CO2, CS2, C2Cl2F4, C2Cl3F3, C2Cl4, C2HCl3, C2H2, C2H2Cl2, C2H2F4, C2H3Cl3, C2H4, C2H4Cl2, C2H5OH, C2H6, C3H4, C3H6, C3H7OH, C3H8, C3H8O2, C4H6, C4H8, C4H10, C4H8O, C4H9OH, C5H12, C6H10O, C6H12, C6H14, C7H16, C7H8, C8H10, He, H2, H2O, NH3, NO, N2O, O2, SF6, SO2
S710 19" rack for analyzer cabinets and standard applications
S715 wall-mounting enclosure for harsh application conditions and zone 2 explosive environment (ATEX)
S720 flame-proof housing for zone 1 explosive environment (ATEX)

Cold-dry Extractive gas analyzers

The SIDOR is a gas analyzer for measurement of up to 2 infrared components
Paramagnetic or electrochemical O2 measurement
Automated adjustment with component-free ambient air
Emission monitoring according to 13th (2001/80/EC) and 27th German Federal Emission Protection Directive (BImSchV).
Combustion optimization of small boilers
Monitoring of landfill gas and bio fermenters
Operational measurements in power stations

Hot-wet Extractive gas analyzers

CEMS solutions MCS100E HW
Measured values: CH4, CO, CO2, H2O, HCl, N2O, NH3, NO, NO2, O2, SO2
The MCS100E HW is an analyzer system for the extractive measurement of up to 8 IR active gas components.
Emission monitoring in waste incineration plants
Monitoring of incinerators with secondary fuels
Flue gas monitoring in cement plants
Emission monitoring in refineries
Emission monitoring of land-based, heavy fuel fired diesel engine power plants

Hot-wet Extractive gas analyzers

CEMS solutions MCS200HW
The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
SO3 monitoring in coal-fired power plants

C-slot cylinders

Cylinder types with adapter: Round body cylinder/ Profile cylinders and tie-rod cylinders/ SMC rail CDQ2/ SMC rail ECDQ2
Measuring range: 25 mm ... 200 mm
Housing length: 41 mm ... 215 mm
Supply voltage: 12 V DC ... 30 V DC
Analog outputs (for current or voltage), switching output, and IO-Link