Steel Cord Conveyor Belts
- Pipex and Piflex are rubber conveyor belts designed for tubular conveyor systems equipped with a Textile or a Steel Cord carcass, respectively.
- Wear resistant
- Oil resistant
- Heat resistant
Hot-wet Extractive gas analyzers
- CEMS solutions MCS100FT
- The FTIR measuring principle allows the simultaneous determination of more than 12 measuring components – tailor-made for the particular requirements of the customer.
- Lowest approved HF measuring range: 0 ... 3 mg/m³
- Automatic spectrum adjustment via AutoVAL for reliable measuring values
- Approved according to EN 15267
- Emission monitoring in waste incineration plants
- Effective HF limit value monitoring, e. g., in aluminum production
- Monitoring of gaseous emissions in cement plants or power stations
Transmittance dust Measuring Devices
- The DUSTHUNTER T100 is a measuring device for dust at medium to high concentrations
- For medium to high dust concentrations
- Emissions monitoring at power plants and waste incineration plants
- Easy installation, commissioning and operation
- Measurement independent of gas velocity, humidity and particle charge
- Low maintenance due to self-monitoring
Transmittance dust Measuring Devices
- The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations
- For medium to high dust concentrations
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Monitoring of dust load in factory halls
- Control of fresh air and exhaust air units
Transmittance dust Measuring Devices
- The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light
- Combination of transmittance and scattered light measurement
- For very low to high dust concentrations
- For medium to large duct diameters
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurement of dust concentration in exhaust gas and exhaust air ducts upstream and downstream of filters
Scattered light dust Measuring Devices
- The DUSTHUNTER SB30 is a measuring device, designed to detect very low to moderate dust concentrations, such as in hot or volatile gases
- Automatic check of zero and reference point
- Emissions monitoring in industrial plants including, for example, power plants, heating systems, waste incineration plants, in steel production, and in cement plants
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurements in flue gas ducts upstream and downstream of dust filters
Scattered light dust Measuring Devices
- The DUSTHUNTER SB50 is a measuring device for dust at low to medium concentrations in challenging applications, e. g., in hot or corrosive gases
- For low to medium dust concentrations
- Emission monitoring of heating installations
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurement in cement plants
Scattered light dust Measuring Devices
- Measurement independent of gas velocity, humidity and particle charge
- Approved according to EN 15267
- For medium to large duct diameters
- Emission monitoring of power stations and waste incineration plants
- Monitoring of dust concentrations downstream of filter plants
- Monitoring of dust loads in factory workshops
- Control of fresh air supplies and exhaust air plants
Scattered light dust Measuring Devices
- The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content
- Emission monitoring which does not require permission in industrial systems
- Dust concentration measurements in exhaust gas ducts
- Monitoring of cloth filters for defective filter bags
- Ideal for monitoring electrostatic precipitators
- Dust monitoring in grinding and dosing systems
- Monitoring and regulation of fresh air and exhaust air systems
Scattered light dust Measuring Devices
- The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations
- For very low to medium dust concentrations
- For small to medium duct diameters
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurements in exhaust gas or exhaust ventilation ducts
Scattered light dust Measuring Devices
- The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas
- For very low to medium dust concentrations
- Gas sampling and return combined in one probe
- Contamination check
- Monitoring of wet gas scrubbing facilities
- Measurement in saturated gas downstream of desulfurization plants
- Determination of dust concentrations in wet exhaust air and in technological processes
Hot-wet Extractive gas analyzers
- CEMS solutions MCS200HW
- The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
- Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
- Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
- Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
- SO3 monitoring in coal-fired power plants