Homepage » Product » MATSUSHIMA » Vibrating Level Switch MVL Matsushima

Vibrating Level Switch MVL Matsushima

Brand
Status In stock
Price: Please contact
(Call - Chat Zalo - Send Email)
MVL Matsushima is Vibrating Level Switch; Level detection signal for powders, granules and some liquids; Reliable for low density material; Signal output: SPDTx1; Protection: IP67  
Online support
Phone Call Zalo Chat Zalo Messenger Messenger
Download Datasheet

MVL Matsushima is Vibrating Level Switch; Level detection signal for powders, granules and some liquids; Reliable for low density material; Signal output: SPDTx1; Protection: IP67

Type MVL-110 MVL-120 MVL-130
Product Type Standard Cable suspended Extension pipe
Power Supply/ Power consumption AC/DC22-264V 50/60Hz / 4.7W (AC), 1.8W (DC)
Material Housing: ADC12; Boss SUS316L; Probe: SUS316L
Cable: PE (only MVL-120); Extension pipe: SUS316L
Length Approx. 225mm 600-20000mm 350-2000mm
Mounting R1 thread (Flange mounting available as option)
Lead outlet 2-G1/2
Vibrating frequency Approx. 310Hz
Bulk density ≥ 0.02g/cm³
Detection strength (Tip load) Max 450N – Max 450N
Allowance tensile load Max 3000N
Allowance pressure Max 1.5MPA Max 1.0MPA Max 1.5MPA
Signal output SPDTx1 Contact capacity: AC250V / DC30V,5A
Operation LED At undetected: Green light; At detecting: Red light
Ambient temperature −20°C ~ 60°C  (No freezing)
Detector temperature −40°C ~ 150°C  (No freezing) −20°C ~ 85°C  (No freezing) −40°C ~ 150°C  (No freezing)
Protection IP 67 (with cover and lead outlet closed)
Mass Approx. 1.8 kg Approx. 2.5 kg (L=600mm)
(0.15kg/m)		 Approx. 2.0 kg (L=350mm)
(1.6kg/m)

🔗 View all MATSUSHIMA products at AUMI »»»

🔗 Official MATSUSHIMA website »»»

At glance

  • Vibrating Level Switch is a point-level detection sensor that detects the presence or absence of material by monitoring the damping of the vibrating probe. When the material reaches the vibrating probe and the vibration is reduced, it provides ON/OFF level detection signal for powders, granules and some liquids.

Features

  • Reliable for low density material: Stable detection for low density material which may make the rotary paddle level switch free-spins.
  • Unaffected by material properties: Stable detection for such material which properties such as density or dielectric constant may vary and make the capacitance level switch unstable.
  • Low maintenance operation: The simple vibrating probe design resists material buildup on the probe and requires minimal cleaning. Customer Friendly Design: 2-color operation LED visible through the housing cover; Screw-clamp Terminal Block; 310-degree swivel housing; Detection mode (upper or lower limit) selectable; Free power source (AC/DC22-264V 50/60Hz).
guest

Oldest
Newest
Inline Feedbacks
View all comments

Related Products

Contact Contact AUMI
Zalo Mess Phone Location