Sales promotion

  • Medium: Fluids
  • Measurement: Switch
  • Probe length: 117 mm
  • Process pressure: –1 bar ... 64 bar
  • Process temperature: -50 °C ... +150 °C, See safety notes for ATEX devices
  • ATEX approval: ATEX II 1/2G Ex db IIC T6...T2 Ga/Gb +WHG
  • WHG approval: ✔
  • Output signal: 1 x PNP/NPN
  • Supply voltage: Volt-free transistor output PNP/ NPN: 10 V DC ... 55 V DC

Features:

  • Process connection: Thread G ½ A according to DIN 3852-E
  • Insertion length/diameter of probe: 150 mm / 6 mm
  • Maximum process pressure: ≤ 150 bar
  • Measuring range: –20 °C ... +80 °C
  • Power supply: 15 V DC ... 35 V DC
  • Switching output: 1 x PNP + 4 mA ... 20 mA
  • Connection type: M12 round connector x 1, 4-pin

  • Medium: Liquid, gaseous
  • Pressure type: Gauge pressure
  • Measuring range: 0 bar ... 10 bar
  • Process temperature: –30 °C ... +100 °C
  • Power supply: 14 V DC ... 30 V DC
  • Switching output: 0 V ... 10 V, 3-wire
  • Connection type: M12 round connector x 1, 4-pin

  • Medium: Liquid, gaseous
  • Measuring range: –1 bar ... 24 bar
  • Process temperature: –20 °C ... +85 °C
  • Process connection: G ½ B according to EN 837
  • Power supply: 15 V DC ... 35 V DC
  • Switching output: 1 x PNP + 4 mA ... 20 mA
  • Connection type: M12 round connector x 1, 4-pin

  • Communication interface: Incremental
  • Shaft diameter: 10 mm
  • Pulses per revolution: 360
  • Power supply: 10 ... 32 V
  • Communication Interface detail: HTL / Push pull
  • Number of signal channels: 6-channel
  • Connection type: Male connector, M23, 12-pin, radial)
  • Enclosure rating: IP67/IP65

  • Communication interface: Incremental
  • Shaft diameter: 6 mm
  • Pulses per revolution: 512
  • Power supply: 10 ... 32 V
  • Communication Interface detail: HTL / Push pull
  • Number of signal channels: 6-channel
  • Connection type: Male connector, M23, 12-pin, radial
  • Enclosure rating: IP67/IP65

  • Communication interface: Incremental
  • Mechanical design: Through hollow shaft
  • Shaft diameter: 12 mm
  • Pulses per revolution: 2,000
  • Power supply: 10 ... 32 V
  • Communication Interface detail: TTL / RS-422
  • Number of signal channels: 6-channel
  • Connection type: Cable, 8-wire, universal,(1.5 m)
  • Enclosure rating: IP67/IP65

  • Communication interface: Incremental
  • Mechanical design: Solid shaft, face mount flange
  • Shaft diameter: 10 mm
  • Pulses per revolution: 10,000
  • Power supply: 4.5 ... 5.5 V
  • Communication Interface detail: TTL / RS-422
  • Number of signal channels: 6-channel
  • Connection type: Cable, 8-wire, universal,(1.5 m)
  • Enclosure rating: IP67/IP65

View more

New Product

  • Application: Indoor area
  • Protective field range: 3 m
  • Warning field range: 10 m
  • Scanning angle: 275°
  • Number of fields: 8 / 128
  • The smallest for easy and space-saving design-in for mobile platforms. Only 80 mm high
  • 2-In-1: Reliable safety and precise localization
  • Extremely resistant to light, dust and dirt thanks to the safeHDDM® scan technology
  • High-precision measurement data via Ethernet interface

  • Worldwide revolutionary safety solution for line-guided small vehicles
  • Save space when integrating into your AGCs
  • Safety level: Type 2, PL c, SIL1, SILCL1
  • Warning field range: 4 m
  • Scanning angle: 150°
  • Resolution (can be configured): 50 mm, 70 mm, 150 mm, 200 mm

  • The DIMENSION family includes the widest range of 12 to 48V DIN rail power supplies. The products are classified in three series: Q , C and X with 1-, 2- or 3-phase input and a power of 80 to 960W.
  • Each series assembles various power supply models. Helpful special features like DC-OK relay contact, remote shut-down, spring clamps or DC wide-range input and important approvals are available for every series.
  • Highest performance. Numerous variants. Full featured.
  • Our product family DIMENSION is known for full featured DIN rail power supplies with the highest performance and numerous variants.

  • The decentralized power supplies with high protection classes IP54, IP65 or IP67 were developed for flexible use directly in the field.
  • With FIEPOS, short for FIEld POwer Supply, presents a new type of power supply that was developed precisely for this environment.
  • For 1-phase or 3-phase systems: 300W or 500W

  • perma FUTURA PLUS can be used in all types of applications with ambient temperatures from 0 to +40 °C.
  • Depending on operating conditions, a lubricant volume of 120 cm³ is dispensed in 1, 3, 6 or 12 months.
  • Reliable function is based on an electrochemical reaction, which is started by simply turning the activation cap.
  • The contained gas generator generates a pressure of max. 4 bar, which moves the piston forward and transports lubricant into the lubrication point.

  • perma FLEX PLUS is a compact, ready-to-use lubrication system supplied as a complete unit.
  • It can be used in various types of applications at temperatures ranging from -20 °C to +55 °C.
  • The discharge period is electronically controlled by the gas generating cells and is freely adjustable in monthly steps.
  • The lubrication point is continuously supplied with fresh lubricant throughout the selected discharge period.
  • perma FLEX PLUS has a boost function to quickly provide fresh lubricant.

  • Type: Head mounted
  • Input: Pt100, Pt1000
  • Type of transmitter: Digital
  • Output: 4-20 mA
  • Measuring range: –200…+850 °C / -328…+1562 °F
  • Typical accuracy: Max. ±0,15 K or ±0,15 % of span
  • Configuration: App INOR Connect*
  • Wireless communication: NFC®

  • Type: Rail mounted
  • Input: Pt100, Pt1000
  • Type of transmitter: Digital
  • Output: 4-20 mA
  • Measuring range: –200…+850 °C / -328…+1562 °F
  • Typical accuracy: Max. ±0,15 K or ±0,15 % of span
  • Configuration: App INOR Connect*
  • Wireless communication: NFC®

View more

ABOUT US

PARTNERS

AUTOMATION SOLUTIONS

View more

Contact us

HANOI
  • No B44, Garden villa, Viet Hung urban area, Giang Bien ward, Long Bien Dist., Hanoi, Vietnam
  • +84 24 3762 4275 / 3762 9747 / 3762 8601
  • +84 24 3216 1006
  • +84 24 3216 1006
HO CHI MINH
  • 2nd Floor, HS Building, 260/11 Nguyen Thai Binh Str., Ward 12, Tan Binh Dist., Ho Chi Minh, Vietnam
  • +84 28 6297 8629 / 6292 0331
  • +84 28 6292 0308
  • +84 932 226 100
DA NANG
  • 9nd floor, PV Bank building, No. 2, 30-4 Street, Ward Hoa Cuong Bac, Hai Chau District, Da Nang City
  • (+84) 236.656.2619

Subscribe to receive the latest promotional information.