TTK70 Linear Encoder SICK | AUMI
- Measuring length: up to 4 m
- Maintenance-free and wear-free operation thanks to the non-contact sensing principle
- No reference travel required, as absolute position is recorded
- High travel speed of up to 10 m/s
- Reliable measurement even under contamination and condensation on the magnetic tape
Linear encoders STL/ETL70
- Simple integration of the system thanks to the HIPERFACE® or HIPERFACE DSL® interface
- STL70-2 certified according to SIL2 and PL d (HIPERFACE® interface)
- Measuring lengths: up to 16,384 mm
- High traversing speeds: up to 10 m/s
Linear encoders TTK70
- Measurement lengths of up to 4 m
- Maintenance and wear-free thanks to non-contact measurement principle
- No need for a reference run due to the absolute position recording
- For high traversing speeds of up to 10 m/s
- Reliable measurements, even in the event of contamination and condensation on the magnetic tape
Linear encoders MAX
- 100% mechanical and electrically compatible with existing cylinder constructions.
- Save-spacing installation: Better utilization of the piston stroke in tight installation space of the cylinder
- Favorable cost-benefit ratio.
- Fluid temperature (hydraulic oil) up to max. +95 °C.
- Compact dimensions: 10 mm installation space, 30 mm cushion zone.
Linear encoders DAX
- Low maintenance costs due to wear- and maintenance-free measurement principle.
- Absolute measurement without reference run.
- Intelligent condition monitoring enables predictive maintenance of machines.
- Resolution: up to 10 μm.
- Measuring lengths: 50 mm to 2,500 mm.
Buy Linear Encoder KH53 SICK Official | AUMI
- High efficiency and productivity
- Time savings – no reference run necessary on initial commissioning due to absolute position measurement
- Accurate positioning even with high mounting tolerances
- High reproducibility (0.3 mm / 1 mm), high system resolution (0.1 mm)
- SSI and PROFIBUS interfaces
Genuine SICK TTK50 Linear Encoder | AUMI
- Reference traverse no longer necessary due to absolute measuring system
- Maintenance-free thanks to non-contact measuring principle
- Measured lengths of up to 1 m
- Suitable for high traverse speeds of up to 10 m/s
- HIPERFACE® interface
