MWLM-FM Matsushima is 80GHz Radar Level Transmitter; Max Measurable Distance: 120 m; Resolution: 1 mm; Output Signal: DC 4 mA ~ DC 20 mA; Communication system: Bluetooth 5.0

MWLM-FM Matsushima is 26GHz Radar Level Transmitter; Application: For Powder, Liquid; Max. Measurable Distance: 70 m; Protection: IP67

Admittance Level Switch - MAL Matsushima; Reliable detection even with buildup or varying material properties; L-Length: 6m; Signal output: SPDTx1; Protection: IP67

MVL Matsushima is Vibrating Level Switch; Level detection signal for powders, granules and some liquids; Reliable for low density material; Signal output: SPDTx1; Protection: IP67  

Tilt Switch MFFP Matsushima; Suitable for lump materials; Model configuration: with link chain, with cross paddle; Detection length: 5m max; Protection: IP67

Sounding V MDVC Matsushima; Measuring distance: 20m; Measuring accuracy: 1% F.S.; Output signal: DC4～20mA; Unaffected by material properties

Sounding M's MDMC Matsushima; Unaffected by material properties; Reliable in harsh conditions; Variety of Weight Shapes; Measuring range: 40 m

Displacer Level Switch MFLD Matsushima; Detection independent of liquid properties; Wetted part material: SUS304; Float: SUS316L; Output contact number: SPST reed; Process temperature: -20°C ～ +180°C

Conductive Level Switch MRE Matsushima; Stable even with vapor; 6-points Detection; Wetted parts material: SUS304 / SUS316 / Titanium / Hastelloy C

Float Level Switch MFS Matsushima; Detection independent of liquid properties; Durable Reed Switch; No Power Required; Ex-proof Available

Medium: Fluids; Measurement: Switch; ATEX approval: ATEX II 1/2G Ex db IIC T6...T2 Ga/Gb +WHG; Output signal: 1 x PNP/NPN

• Measurement principle: Vibrating level switch
• Medium: Fluids
• Process temperature up to 150 °C
• Pipe extension up to 1,200 mm
• Housing made of 316L stainless steel
• Output signal: Non-contact switch/ Transistor output PNP/ Transistor output PNP with IO-Link

• Measurement principle: Vibrating level switch
• Medium: Fluids
• Process temperature: –50 °C ... +250 °C, See safety notes for ATEX devices
• Output signal: Non-contact switch/ Double relay (DPDT)/ 1 x PNP/NPN/ NAMUR signal
• Immune to deposit formation
• Hygienic designs according to EHEDG and FDA, compatible for CIP and SIP
• ATEX approval available

• Measurement principle: Vibrating level switch
• Medium: Bulk solids
• Process temperature: –50 °C ... +250 °C, Temperature range with temperature adapter, detection of solids in water, Temperature adapter
• Output signal: Non-contact switch/ Double relay (DPDT)/ 1 x PNP/NPN/ NAMUR signal
• ATEX certifications (1D/2D/1G/2G) available

• Measurement principle: Ultrasonic sensor
• Medium: Fluids, bulk solids
• Measurement: Switch, Continuous
• Process temperature: –25 °C ... +70 °C
• Output signal: 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V/ 2 x PNP/ 2 x NPN/ Push-pull: PNP/NPN; IO-Link 1.1
• Converter protected by PVDF cover for increased resistance
• 3-in-1: Continuous measurement, switching signal, and display

• Measurement principle: Ultrasonic sensor
• Medium: Fluids
• Measurement: Switch, Continuous
• Process temperature: –25 °C ... +85 °C
• Output signal: 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V/ 4 mA ... 20 mA/ 4 mA ... 20 mA, 2-wire
• Non-contact measurement in immersion pipe of up to 1,500 mm
• PTFE-coated membrane and GF D40 process connection made of PTFE