- Low length tolerance – up to 60% shorter than standard ISO profile cylinders, which makes the Series CCI (ISO 21287) ideally suited for compact machine designs
- Simple sensor assembly along the complete cylinder lengths
- Additional configurations possible – features such as special strokes, hollow piston rods, heat-resistant versions, or piston rod extensions can be selected – including documentation and CADs
- Available in piston diameters from 16 mm to 100 mm
Series CCI Compact Cylinders (ISO 21287) AVENTICS ™
- The AVENTICS Series CCI (ISO 21287) cylinders stand for innovative, compact construction and an easy to clean design.
- Easy to clean design preventing the accumulation of dirt
- Low length tolerance – up to 60% shorter than standard ISO profile cylinders, which makes the Series CCI (ISO 21287) ideally suited for compact machine designs
At a glance:
- The AVENTICS Series CCI (ISO 21287) cylinders stand for innovative, compact construction and an easy to clean design.
- The Series CCI (ISO 21287) is ideal for long strokes and increased requirements for optimized cycle times and moving masses.
- The sensors can be installed quickly and easily on all sides and over the entire cylinder lengths.
Features:
- Cylinder housing consists of a continuous aluminium profile, with pressed in front and rear cover
- Easy to clean design preventing the accumulation of dirt
- Low length tolerance – up to 60% shorter than standard ISO profile cylinders, which makes the Series CCI (ISO 21287) ideally suited for compact machine designs
- Simple sensor assembly along the complete cylinder lengths
- Additional configurations possible – features such as special strokes, hollow piston rods, heat-resistant versions, or piston rod extensions can be selected – including documentation and CADs
- Available in piston diameters from 16 mm to 100 mm
You can download more at the document here: Download
Related products
TRA Series
- Hygienic compact sensor with flange DN25/38 ISO 2852 clamp connection
- Measuring element: Pt100
- Process temperature: -50…+200°C
- Material: 1.4404 / 316L
- Diameter: 6 mm
- Output: 4...20 mA, temperature linear
- Transmitter accuracy: ±0.15°C or ±0.15% of measuring span
- The AVENTICS S Series is a stainless-steel NFPA Interchangeable pneumatic cylinder line designed to perform in the toughest wash down applications.
- Bore: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8"
- Operating Environment: Corrosive; Indoor; Washdown
- Standard rod wiper construction is highly durable polyurethane
CYLINDERS
- The AVENTICS Series ACCU is an economical pneumatic linear actuator line that contains an internal linear resistive transducer.
- Continuous position monitoring through internal linear resistive transducer (LRT)
- Bore: 1 1/2", 1-1/16", 2", 2 1/2", 3 1/4", 4", 5", 6", 8"
- Operating Environment: Corrosive, Hazardous, Indoor, Outdoor, Washdown
- The AVENTICS Series PRA (ISO 15552) cylinders have a compact design profile with integrated sensor slots.
- The Series PRA (ISO 15552) cylinders can be used for all industries.
- 6 mm T-slots and 4 mm C-slots allow for a large number of sensors to be mounted easily, quickly and compactly
- Available in piston diameters from 32 mm to 125 mm
- The AVENTICS Series CCL-IS (ISO 15552) cylinder in clean design is produced specifically for packaging applications in the food industry.
- Easy to clean anodized surfaces
- Scrapers and lubricants (NSF-H1) are approved for food applications
- Hygienic protective caps for unused mounting holes
