Industrial Sensors
LiDAR sensors PicoScan100
- Precise detection of small and dark objects, even over large distances.
- High cost efficiency: Low acquisition and operating costs.
- Flexible mounting and fast device exchange.
- Scanning range: 75 m (90 % remission); angular resolution: 0.5° to 0.05°.
- Drivers: ROS, C++ and Python.
Laser distance sensors OD5000
- Very good measurement performance, even with quick or rotating objects thanks to high measuring frequency.
- Sensor is easy to configure via a web server interface.
- Reliable edge detection thanks to innovative analysis algorithm.
- Measuring frequency up to 80 kHz.
- Ethernet interface with TCP/IP protocol directly in the sensor head.
Laser distance sensors Dx50-2
- A wide measuring range and a compact housing increase the number of possible applications.
- Three switching modes provide a simple solution for demanding applications.
- Measuring range up to 10 m on black targets and up to 30 m on white targets, compact dimensions.
- Output rate up to 3,000/s.
- Repeatability: 0.5 mm to 5 mm.
TMS/TMM22 SICK Inertial Sensor
- Precise one- or two-dimensional inclination measurement for cost-sensitive applications.
- Analog output signal ensures compatibility in industrial environments.
- Measurement accuracy: Up to ± 0.1°.
- Analog interfaces: 0 V to 10 V and 4 mA to 20 mA.
- Enclosure ratings: IP66, IP68, IP69K.
Inertial sensors TMS/TMM88 SICK
- Inclination measurement in two axes without mutual interference.
- Single-axis inclination measurement over 360° with configurable zero point.
- Accuracy up to ±0.02°.
- Plastic or aluminum housing.
- Programmable with the PGT-12-Pro.
Inertial sensors TMS/TMM88 Dynamic
- Inclination measurement in two axes without mutual interference.
- Single-axis angle measurement over the full 360° with configurable zero point.
- Flexible configuration via CANopen or SAE J1939 as well with the PGT-12-Pro.
- Programmable with the PGT-12-Pro.
- Temperature range: −40 °C to +80 °C
Fiber-optic sensors and fibers LL3
- Resistant to damage caused by mechanical and chemical stress, as well as high temperatures.
- Simple installation saves time.
- For detection of objects, surfaces, leading edges, and fluid levels.
- Threaded and smooth sleeves, bands of light (array), 90° reflection versions available.
- Plastic , protective metal or Teflon sheathing available.
Cylinder sensors MZT7
- Cylinder sensors with very good price-performance ratio for T-slot.
- The SICK MZT7 cylinder sensor with GMR technology reliably detects the piston position in pneumatic drives.
- The MZT7 can be mounted directly into all cylinders with standard T-slots. SICK also has an extensive range of adapters which enable the MZT7 to be used with other cylinder types.
- The MZT7 is characterized by its simple mounting principle: Insert the sensor into the slot and rotate the fixing screw a quarter turn to fix it securely to the cylinder.
Cylinder sensors MZ2Q-C
- One sensor, two switching points: Reduces commissioning time and costs.
- Maximum flexibility thanks to a detection zone up to 50 mm.
- Easy adjustment of two switching points via teach-in pushbutton.
- LEDs for indicating the two switching points.
- Detection range up to 50 mm stroke.
Cylinder sensors MZ2Q-T
- Maximum flexibility thanks to a detection zone up to 50 mm.
- Suitable for precise pneumatic applications due to intuitive and precise definition of two switching points.
- LEDs for indicating the two switching points.
- Detection range up to 50 mm stroke.
Cylinder sensors MZT8 Twin
- Can be used at temperatures up to 80 °C.
- Very rugged housing with enclosure rating IP68 extends the service life of the sensor.
- Low cabling requirements.
- Two switching points - one connection.
- Sensor variant for T-slot cylinder with two MZT8 sensor heads on one male connector.
Cylinder sensors RZN
- Reed contact cylinder sensors for IMI Norgren pneumatic cylinders and drives
- The RZN reed contact cylinder sensor reliably detects the position of the magnetic piston in pneumatic cylinders and drives from IMI Norgren.
- Due to its special design, the RZN cylinder sensor is particularly well-suited for mounting in the integrated switch slot of pneumatic cylinders and drives from IMI Norgren.
- The RZN reed contact cylinder sensor is simply screwed into the switch slot and can be quickly and securely fastened to the pneumatic cylinder. The RZN sinks completely into the slot after mounting.
