- No supplementary Ethernet gateway required with Ethernet models – lowers costs
- The CLV62x scanner can be used as a multiplexer in any CAN scanner network from SICK – no supplementary multiplexer necessary
- SMART620 code reconstruction technology
- High scanning frequency of up to 1,200 Hz
- IP 65 or IP 69K rated (depending on type)
Barcode scanners
- Readable code structures: 1D
- Code resolution: 0.15 mm ... 1 mm
- Reading distance: 50 mm ... 630 mm
- The CLV503 is ideal for slow moving applications – with a scanning frequency of 100 Hz.
- The CLV505 offers a high scanning frequency of 1,000 Hz and is suitable for conveyor speeds of up to 5 m/s, depending on the application.
- Available as RS-232 variant with flying leads and as USB variant
Barcode scanners
- Readable code structures: 1D
- Sensor: CMOS line sensor
- Sensor resolution: 2,048 px
- Code resolution: 0.125 mm ... 0.5 mm
- Reading distance: 15 mm ... 105 mm
- RS-232 or USB interface to connect to a control or an industrial computer
Barcode scanners
- Readable code structures: 1D
- Code resolution: 0.2 mm ... 1 mm
- Reading distance: 44 mm ... 735 mm
- Enhanced SMART technology reads damaged and partially obscured codes, increasing read rates
- A variety of reading distances can be covered by long-, mid- and short-range variants. All variants such as line or grid scanners, side light emission and oscillating mirrors as well as Ethernet versions are available.
- Advanced, easy-to-use SOPAS configuration software
Barcode scanners
- Readable code structures: 1D
- Code resolution: 0.17 mm ... 1.2 mm
- Reading distance: 400 mm ... 2,200 mm
- Higher reading rate on damaged, heavily contaminated and partially damaged bar codes using the SMART+ algorithm
- Increased processing allows for faster and more accurate performance on demanding applications
- Fewer costs since no additional Ethernet gateway is required when using the Ethernet clone plug
- Consistent, user-friendly "SOPAS ET" software
