Signal isolation
- Type of input: Active
- No. of channels: 1 channel
- Input signal: 0…20 mA 4…20 mA 0…10 V
- Output signal: ±10 mA ±20 mA 0(2)…10 mA 0(4)…20 mA ±5 V ±10 V 0(1)…5 V 0(2)…10 V
- Typical accuracy: 0,1 % FS
- Isolation level: 4 kV, 50 Hz
- Power supply: 20…253 VAC/DC
- Cut-off frequency (-3 dB): 30 Hz/10 kHz switch select.
Signal isolation
- The input loop-powered isolator IsoPAQ-612 provides galvanic separation for 0(4) … 20 mA standard signals, while transferring the measurement signal to the output with a high degree of accuracy.
- Input signal: 0(4)-20 mA
- Output signal: 0(4)-20 mA
- The IsoPAQ-612 requires no additional power supply since the auxiliary power is obtained from the input signal without distorting it.
Signal isolation
- The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.
- Input signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
- Output signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
- The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary
Signal isolation
- The Bipolar Isolation Amplifier IisPAQ-661 is used for isolation and conversion of bipolar and unipolar industrial standard signals.
- Input Current (calibrated switchable): ±20 mA, 0… 20 mA, 4… 20 mA/ ±10 mA, 0… 10 mA, 2… 10 mA
- Input Voltage (calibrated switchable): ±10 V, 0… 10 V, 2 … 10 V/ ±5 V, 0… 5 V, 1 … 5 V
- Output Current (calibrated switchable): ±20 mA, 0… 20 mA, 4… 20 mA/ ±10 mA, 0… 10 mA, 2… 10 mA
- Output Voltage (calibrated switchable): ±10 V, 0… 10 V, 2 … 10 V / ±5 V, 0… 5 V, 1 … 5 V
Signal isolation
- Input mA: -1 to +50 mA
- Input impedance: 10 Ω
- Adjustments – Zero: Any value within range limits
- Adjustments – Minimum spans: 0,4 mA
- Output: 4-20 / 20-4 mA
- Galvanic isolation: 1500 VAC, 1 min
- Power supply: 7,5 to 36 VDC
- Typical accuracy: ±0,1 % of span
Exhaust Gas Analyser
- Multichannel laser scattered light principle
- Precise measurement from 200 μg/m³
- Media temp. up to 500 °C, dew point up to 80 °C
- High contrast color touchscreen
- Remote control and data logger
- Can be qualified for various particle types
Exhaust Gas Analyser
- Exhaust gas measurement for diesel and petrol engines
- Seperate NO and NO2 measurement
- Measurement of RPM and Oiltemp
- Conversion to reference oxygen value
- Values displayed as volume or mass concentration
- According to OIML Class 1
Exhaust Gas Analyser
- Compact workshop instrument for performing the AU on diesel vehicles
- with speed sensing for conventional vehicles
- with the Bluetooth OBD module for modern OBD vehicles
- Future proof for Euro 6 vehicles
- Opacilyt 1030 and OBD interface of the vehicle are connected to the PC / laptop
- AU software with integrated AU target database also available for commercial vehicles
Exhaust Gas Analyser
- Small, compact and robust gas analyzer for measuring gasoline vehicles
- Easy connectable to PC / Laptop
- Wireless connection via Bluetooth
- ASA network capable and compatible to AUPlus
Industrial Analysis
- Gas analysis system for up to 8 (special solution 10) gases / ranges simultaneously
- Gases, measuring ranges, gas transportation and gas processing customer specific
- High-contrast color touch screen, intuitive operation
- Suitable for fully automatic operation in process control / monitoring
OEM Products
- Multi-channel NDIR measuring bench for up to 6 gases
- Custom configuration
- Wide range of gases and measuring ranges
- Outputs RS232 and analogue 4-20mA (Option)
NDIR8000
- Multi-channel NDIR measuring bench for up to 6 gases
- Special version for TOC with high resolution 100ppm CO2 channel
- Outputs RS232 and analogue 4-20mA (Option)
- For direct integration in your analyzers and process controls
- High accuracy and linearity
