CYLINDERS
- The ASCO Numatics Series 441 is a line of robust, compact short-stroke pneumatic cylinders.
- FunctionThrough Rod, Single Acting, Non Rotation, Double Acting, Single Rod
- Standards / Regulations: ATEX Zone 1-21, ATEX Zone 2-22
- Handles lubricated and unlubricated air
- The AVENTICS Series CCL-IS (ISO 15552) cylinder in clean design is produced specifically for packaging applications in the food industry.
- Easy to clean anodized surfaces
- Scrapers and lubricants (NSF-H1) are approved for food applications
- Hygienic protective caps for unused mounting holes
CYLINDERS
- The AVENTICS Series RPC round profile cylinders offer a wide variety of connection options.
- They are easy to clean and suitable for packaging applications in the food industry due to food grade lubricants.
- Compact and space-saving design
- Shorter than a cylinder according to ISO 15552
- The AVENTICS Series CVI is a cylinder valve unit with two ISO cylinder Series and five freely combinable valve Series, you can custom-configure individual units online
- According to ISO 15552
- Ø 32 mm ... 125 mm
- Stroke: 2800 mm
- The AVENTICS Series PRA (ISO 15552) cylinders have a compact design profile with integrated sensor slots.
- The Series PRA (ISO 15552) cylinders can be used for all industries.
- 6 mm T-slots and 4 mm C-slots allow for a large number of sensors to be mounted easily, quickly and compactly
- Available in piston diameters from 32 mm to 125 mm
CYLINDERS
- The AVENTICS Series ACCU is an economical pneumatic linear actuator line that contains an internal linear resistive transducer.
- Continuous position monitoring through internal linear resistive transducer (LRT)
- Bore: 1 1/2", 1-1/16", 2", 2 1/2", 3 1/4", 4", 5", 6", 8"
- Operating Environment: Corrosive, Hazardous, Indoor, Outdoor, Washdown
- The AVENTICS Series 652 is an easy-to-install line of pneumatic filters, regulators and lubricators (FRLs) that offer the industry´s highest flow rates and widest temperature ratings.
- Extended high- and low-temperature capabilities (-40° C to 80° C) allow the FRLs to be specified across a broad range of applications, including those within harsh environments.
- Pipe / Port Size: 1/4 ; 1/2 ; 3/8
- Operating Environment: Indoor, Outdoor
- The AVENTICS S Series is a stainless-steel NFPA Interchangeable pneumatic cylinder line designed to perform in the toughest wash down applications.
- Bore: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8"
- Operating Environment: Corrosive; Indoor; Washdown
- Standard rod wiper construction is highly durable polyurethane
Subminiature connectors
- These snap-in connector series can be supplied with up to 5 contacts rated 3A at 60V.
- 3 – 5 contacts
- Degree of protection IP40
- Solder termination
- Moulded versions
- Easy assembly
Subminiature connectors
- Bayonet locking system
- 2 – 8 contacts
- Degree of protection IP40
- Solder termination
- Diameter 12 mmSnap-in locking system
Subminiature connectors
- Screw termination M9
- 2 – 8 contacts
- Degree of protection IP67
- Solder termination
- Moulded versions
- Diameter 11.5 – 14 mm
- Shieldable
Miniature connectors
- Miniature round connectors with snap-in locking of the 720 series have 3 to 12 contacts depending on the application
- 3 – 12 contacts
- Degree of protection IP67
- Solder termination
- Moulded versions
- Diameter 16 mm
- Coloured versions
