Rubber Conveyor FLEXOBORD® SIG; Flexobord belts are based on the following main components Base belt, Sidewalls, Cleats; The complete range of SIG Rubber Conveyor Belts is produced according to the international standards; This cross stabilized base belt can be sold as indipendent product with the brand name CROSSRIGID®.

ARABELT® is a rubber conveyor belt characterized by only one ply with a special construction named “straight warp”; Two other properties make aramid similar to steel: high heat and flame resistance.; High working temperature; Density similar to textile fibres; Tensile and elongation similar to steel cord

Rubber Conveyor TEXBIND® SIG; High impact, tear and cutting resistance thanks to its special double reinforced weft; Superior longitudinal flexibility that allows smaller pulleys; Very low permanent elongation guaranteed by straight warp construction; High efficiency with mechanical jointing

Rubber Conveyor TEXTER® SIG; Wide selection of cover compounds; Very low permanent elongations; Maximum load support; High resistance to tear and cutting; Good impact resistance; Apt to mechanical fasteners; Humidity proof

Rubber Conveyor SPINATEX® SIG; SPINATEX R15; SPINATEX G15; SPINATEX G25; SIG reserves the right to introduce at any time such modification as would seem justified by continual development and improvement; Dimensional tolerances: ISO 251

Elevator belts ELETEX® SIG; Belts designed to be used in bucket elevator plant only. The special construction of the reinforced polyester-nylon fabrics assures the use of such belts also for severe loading requirements; Polyester warp assures high resistance to heavy working conditions; Nylon weft guarantees transverse tearing strength and strong bolt holding.

Elevator belts ELEMET® SIG; The structure of ELEMET elevator belts is a steel carcass composed by a strong warp of steel cord with suitable elastic modulus such to reach the best compromise between low elongation and good flexibility

Conveyer belts SIDERFLEX® SIG; Excellent cut and tear resistance; Low elongation; High tensile strength; Good impact resistance; Excellent longitudinal flexibility; Very good troughability

Conveyor belts SEALTEX® SIG; High transversal stiffness; Double steel breaker in the covers; Minimum lateral supports required; High longitudinal flexibility; Small pulley required; UV – ozone total protection

Conveyor belts RIPSAVE® SIG; RIPSAVE is an EP (polyester / nylon) multiply belt equipped with special and highly flexible transversal; steel reinforcement.; Steel wires properties are such as to guarantee the absence of any belt stiffening and the perfect integration with the fabric carcass.

Pipex and Piflex are rubber conveyor belts designed for tubular conveyor systems equipped with a Textile or a Steel Cord carcass, respectively; Wear resistant; Oil resistant; Heat resistant