Rotary Encoders
Official SSI SICK AFS/AFM60 Encoder | AUMI
- Encoder design: Multiturn / Singleturn
- Shaft type: Solid shaft, Servo flange/ Solid shaft, face mount flange/ Blind hollow shaft/ Through hollow shaft/ Shaft diameter
- High-resolution absolute encoder with up to 30 bits (AFM60) or 18 bits (AFS60)
- SSI, SSI + incremental or SSI + sin/cos interface
- Operating temperature: –40 °C ... +100 °C (depending on the type)
Absolute encoders ATM60 Profibus
- Encoder design: Multiturn
- Shaft type: Solid shaft, face mount flange/ Solid shaft, Servo flange/ Blind hollow shaft/ Shaft diameter
- Versatility thanks to a variety of electrical connection adapters (3x PG, 3x M12)
- Safer applications thanks to highly reliable shock and vibration resistance
- Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
- Electrical interface: PROFIBUS DP as per IEC61158 / RS 485 , electrically isolated.
Absolute Encoder AHS/AHM36 SICK Official | AUMI
- Encoder design: Singleturn / Multiturn
- Shaft type: Solid shaft, Servo flange/ Solid shaft, face mount flange/ Blind hollow shaft/ Shaft diameter
- Easy integration into various control environments with IO-Link, CANopen and SSI interfaces
- High resistance to ambient influences due to stainless steel design and IP69K enclosure rating (Inox versions)
- 36 mm absolute encoder with maximum 26 bits (singleturn: 14 bits multiturn: 12 bits)
- IP67 to IP69K protection class
Wire draw encoders HighLine
- Measuring range: 0 m ... 50 m
- Resolution: 0.0008 mm ... 0.2 mm
- Communication interface: IO-Link / IO-Link V1.1 / COM3 (230,4 kBaud)/ CANopen/ SSI/ PROFINET/ EtherCAT®/ EtherNet/IP™/ PROFIBUS DP/ DeviceNet™/ 4...20 mA/ 0...10 V/ Incremental (TTL / RS-422)/ Incremental (HTL / Push pull)/ Incremental (TTL / HTL)
- Reliable solution for use in harsh ambient conditions
Measuring wheel encoders DBV50
- Resolution in pulses/mm: 0.01 ... 12.5
- Spring deflection spring arm: ± 3 mm
- Measuring wheel circumference: Without measuring wheel / 200 mm
- Measuring wheel surface: O-ring NBR70
- Resolution: 0.08 mm per pulse, 12.5 pulses per mm
- Max. spring travel: 14 mm, mechanically limited, max. spring force: 21 N
Measuring wheel encoders DFV60
- Resolution in pulses/mm: 218.45 / 3.41
- Spring deflection spring arm: ± 10 mm
- Measuring wheel circumference: 300 mm
- Measuring wheel surface: O-ring NBR70
- The high level of spring tension enables use in harsh environmental conditions
- Programmability via the PGT-08 programming software and the PGT-10-S display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs
- Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull
Motor feedback systems VFS60
- High performance and reliability even in rough ambient conditions.
- High vibration resistance and extended temperature range through nickel code disk.
- TTL, HTL or sine 0.5 Vpp interfaces.
- Resolution of up to 65,536 lines per revolution.
- Individual programming of the interface, line count and of the zero pulse.
Motor feedback systems EKS/EKM36
- Minimal cabling thanks to integration of the encoder communication into the motor cable.
- Optimization of the controller circuit via automated synchronization with the controller cycle.
- E²Prom with 8 KB of free memory space.
- SIL2-certified (only applies to EKS/EKM36-2...).
Motor feedback systems SKS/SKM36
- The stand-alone version is ideally suited as a master and path encoders.
- The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market.
- Integrated version and stand-alone design.
- Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...).
Motor feedback systems SEK/SEL
- Its small dimensions allow manufacturers of small and very small motors to achieve a significant reduction in the length of their motors.
- The SEK/SEL37 motor feedback systems are particularly suitable for use under harsh ambient conditions.
- Electronic type label.
- HIPERFACE® interface.
- RoHS-compliant.
Motor feedback systems ELS/ELM35
- Highly cost-effective and ideal for standard applications
- Easy operation.
- High resilience, even when used in mobile applications.
- 36 mm housing diameter, 22 mm length, and 6 mm diameter blind hollow shaft allow it to be installed even in small servo motors.
Measuring wheel encoders DKV60
- Mounting bracket made of spring steel allows for high measurement accuracy with deflection of the measuring wheel in X and Y direction.
- Low-cost encoder with excellent quality.
- High resolution up to 0.1 mm (1 … 2,000 pulses/revolution).
- Electrical interfaces: Open Collector NPN, TTL/RS-422 or HTL/push pull.
