Rotary Encoders
Absolute encoders ARS60
- Freely programmable resolution (up to 15 bits)
- Easy zero adjustment directly on the encoder by pressing a button or via sub cable (cable version)
- Zero-set function
- Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
- Enclosure rating: Up to IP66
Absolute encoders ACS/ACM36
- The ACS36 (singleturn) and ACM36 (multiturn) encoder families have an analog interface with a maximum resolution of up to 3723 steps (for singleturn and multiturn).
- The analog interfaces (current/voltage) offer a low-cost solution for detecting the position and path, and thereby help to reduce overall system costs.
- IP65 protection class
- Operating temperature: –30 °C to +80 °C
Absolute encoders ACM60
- The ACM60 (multiturn) encoder family has an analog interface with a maximum overall resolution of up to 13107 steps.
- A current signal of 4-20 mA or a voltage signal of 0-10 V is output depending on the device version.
- Programming via keypad on the encoder
- IP68 protection class
- Operating temperature: –30 °C to +80 °C
Buy Linear Encoder KH53 SICK Official | AUMI
- High efficiency and productivity
- Time savings – no reference run necessary on initial commissioning due to absolute position measurement
- Accurate positioning even with high mounting tolerances
- High reproducibility (0.3 mm / 1 mm), high system resolution (0.1 mm)
- SSI and PROFIBUS interfaces
Motor feedback systems STS
- Increase in dynamics and PSDI times due to the elimination of mechanical components, such as belts
- Bearing-free technology maximizes the service life and machine availability of the overall system
- Resolutions up to 12,672 measurement steps per revolution
- Accuracy of up to ± 0.05°
- For hollow shaft diameters from 30 mm to 500 mm
Genuine SICK TTK50 Linear Encoder | AUMI
- Reference traverse no longer necessary due to absolute measuring system
- Maintenance-free thanks to non-contact measuring principle
- Measured lengths of up to 1 m
- Suitable for high traverse speeds of up to 10 m/s
- HIPERFACE® interface
Measuring wheel encoders DUV60
- Maintain a high level of productivity using the anti-dither functionality
- Compatible with existing and low-cost input cards with output types like Clockwise/Counterclockwise and Signal/Direction
- Universal 4.5 V ... 30 V supply
- LEDs that indicate encoder status and output signal.
- M12 male connector, 4- or 8-pin, or universal cable outlet
Encoder EcoLine
- Measuring range: 0 m ... 10 m
- Resolution: 0.001 mm ... 0.14 mm
- Communication interface: IO-Link / IO-Link V1.1 / COM3 (230,4 kBaud)/ CANopen/ SSI/ PROFINET/ EtherCAT®/ EtherNet/IP™/ DeviceNet™/ PROFIBUS DP/ 4...20 mA/ 0...10 V/ Incremental / TTL / RS-422/ Incremental (HTL / Push pull)/ Incremental (TTL / HTL)
- Very small, slim housing (55 mm ... 190 mm) with spring integrated in the measurement drum
Incremental encoders DLS40
- Pulses per revolution: 0 … 1024
- Mechanical design: Solid shaft, face mount flange
- Shaft diameter: 6 mm
- Communication interfaces: TTL / RS-422, HTL / Push pull, and Open Collector
Incremental encoders DBS36 Core
- Pulses per revolution: 0 … 2,500
- Mechanical design: Solid shaft, Servo flange/ Solid shaft, face mount flange/ Blind hollow shaft
- Shaft diameter: 6 mm feather key groove/ 6 mm/ 1/4"/ 8 mm
- Communication interfaces: TTL/RS-422, HTL/push pull, Open Collector
- Temperature range: –20 °C ... +85 °C
- Enclosure rating: IP65
Incremental encoders DBS50 Core
- Pulses per revolution: 0 … 2,500
- Mechanical design: Solid shaft, face mount flange/ Solid shaft, face mount flange 3xM4
- Shaft diameter: 8 mm
- Communication interfaces: TTL/RS-422, HTL/push pull, Open Collector
- The high flexibility of the mechanical interface of the encoder and the available accessories allow for the use of a single design in many applications
Incremental encoders DFS60
- Pulses per revolution: 0 ... 65,536
- Sine/cosine periods per revolution: 1,024
- Mechanical design: Solid shaft, Servo flange/ Solid shaft, face mount flange/ Blind hollow shaft/ Through hollow shaft
- Shaft diameter: 6 mm/ 10 mm/ 8 mm/ 3/8"/ 12 mm/ 1/2″/ 14 mm/ 15 mm/ 5/8″
- Programmability via the PGT-08 programming software and the PGT-10-Pro display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs
- Electrical interfaces: 5 V & 24 V TTL/RS-422, 24 V HTL/push pull, 5 V sin/cos 1 Vss
