The product Absolute encoders A3M60A-BHPB014x17 is designed in accordance with European industrial standards, providing all essential technical specifications to help engineers easily select and integrate it into their systems. These specifications include measuring range/detection capability, accuracy, response time, output signal, power supply, IP protection rating, and operating environmental conditions.
Depending on the specific model and application, the device may support various connection options, communication protocols, or advanced features to meet the requirements of automation, safety, and reliability in industrial environments.
Below is the detailed technical specification table of the product:
| Safety-related parameters | |
| MTTFD (mean time to dangerous failure) | 60 years (EN ISO 13849-1) |
| Performance | |
| Number of steps per revolution (max. resolution) | 16,384 (14 bit) |
| Number of revolutions | 131,072 (17 bit) |
| Max. resolution (number of steps per revolution x number of revolutions) | 14 bit x 17 bit (16,384 x 131,072) |
| Error limits G | 0.35° (at room temperature) |
| Repeatability standard deviation σr | 0.15° (at room temperature) |
| Interfaces | |
| Communication interface | PROFIBUS DP |
| Communication Interface detail | DPV0 / DPV1 / DPV2 |
| Data transmission rate (baud rate) | ≤ 12 MBaud |
| Initialization time | Approx. 1 s |
| Parameterising data | Number of steps per revolution Number of revolutions PRESET Counting direction Sampling rate for position calculation Unit for output of the speed value Round axis functionality |
| Available diagnostics data | Maximumspeed Power-on counter Operating hour counter Counter for number of cw movements/number of ccw movements Minimum andmaximum operating voltage |
| Bus termination | DIP switch |
| Electronics | |
| Connection type | Male connector, 2x, M12, 5-pin, axial Female connector, 1x, M12, 5-pin, axial |
| Supply voltage | 10 … 32 V |
| Power consumption | ≤ 1.5 W |
| Reverse polarity protection | ✔ |
| Mechanics | |
| Mechanical design | Blind hollow shaft |
| Shaft diameter | 15 mm |
| Characteristics of the shaft | Front clamp |
| Weight | 0.28 kg |
| Shaft material | Stainless steel |
| Flange material | Aluminum |
| Housing material | Aluminum |
| Start up torque | 2 Ncm (+20 °C) |
| Operating torque | 1.6 Ncm (+20 °C) |
| Permissible movement static | ± 0.3 mm (radial) ± 0.5 mm (axial) |
| Permissible movement dynamic | ± 0.1 mm (radial) ± 0.2 mm (axial) |
| Operating speed | ≤ 6,000 min⁻¹ |
| Bearing lifetime | 3.0 x 10^9 revolutions |
| Angular acceleration | ≤ 500,000 rad/s² |
| Ambient data | |
| EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Enclosure rating | IP67, shaft side (IEC 60529) IP67, housing side (IEC 60529) |
| Permissible relative humidity | 95 % (Condensation not permitted) |
| Operating temperature range | –30 °C … +80 °C |
| Storage temperature range | –40 °C … +100 °C |
| Resistance to shocks | 80 g, 6 ms (EN 60068-2-27) |
| Resistance to vibration | 30 g, 10 Hz … 2,000 Hz (EN 60068-2-6) |
| Certificates | |
| EU declaration of conformity | ✔ |
| UK declaration of conformity | ✔ |
| ACMA declaration of conformity | ✔ |
| Moroccan declaration of conformity | ✔ |
| China RoHS | ✔ |
| cULus certificate | ✔ |
| Information according to Art. 3 of Data Act (Regulation EU 2023/2854) | ✔ |
| Classifications | |
| ECLASS 5.0 | 27270502 |
| ECLASS 5.1.4 | 27270502 |
| ECLASS 6.0 | 27270590 |
| ECLASS 6.2 | 27270590 |
| ECLASS 7.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 8.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 10.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 12.0 | 27270502 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
