System plugs and extension modules FLX0-ACC0300 SICK

Brief description: Small connection module for one sensor, 4 cable glands, base for CMC600; Supported products: CLV61x - CLV65x Lector62x RFH6xx RFU62x; Cloning module support (CMC): Yes; Supports display module (CMD): No; Supports power supply module (CMP): No; Supports fieldbus gateway (CMF): No; Supply voltage: (10 V DC ... 30 V DC); Power consumption: 1 W

SUBMINIATURE BAYONET CONNECTOR IP40 Binder; Bayonet locking system; 2 – 8 contacts; Degree of protection IP40; Solder termination; Diameter 12 mmSnap-in locking system

Brief description: Small connection module for a sensor, 5 cable glands, socket for CMC cloning module; Supported products: CLV61x - CLV65x Lector62x RFH6xx RFU62x; Cloning module support (CMC): Yes; Supports display module (CMD): No; Supports power supply module (CMP): No; Supports fieldbus gateway (CMF): No; Supply voltage: (10 V DC ... 30 V DC); Power consumption: 1 W

Brief description: Connection of a SICK sensor in a Power-over-Ethernet (PoE) environment. Splitting of PoE signal into 24 volt supply voltage and Ethernet. A power supply for heating sensors can optionally be connected (e.g., for LMS511, LMS531). Suitable for use in indoor and outdoor applications with a low corrosive environment. The material of the sensor plug and the PoE connection module should be equivalent. The connection module is equipped with cable gland made of nickel-plated brass and PUR cables with nickel-plated zinc die cast M12 male connectors.; Application: Outdoor; Supported products: LMS5xx LMS1xx LMS1000 LRS4000 MRS1000 PeopleCounter picoScan100; Scope of delivery: PoE connection unit, 2 x M4 x 16 mm hexagon screws for mounting the unit, 1 x RJ45 adapter; Connection type: 1   x “Ethernet” connection, 8-pin RJ45 female connector 1   x “Supply voltage to sensor” connection, 5-pin M12 female connector, A-coded 1   x “Ethernet sensor” connection, 5-pin M12 female connector, A-coded; Supply voltage: (42.5 V DC ... 57 V DC), according to PoE, IEEE802.3at Type 2, Class4 / PoE+; Power output: Max. 25 W; Housing: Aluminum, polypropylene

Brief description: Small connection module for one CLV41x; Supported products: CLV41x; Cloning module support (CMC): No; Supports display module (CMD): No; Supports power supply module (CMP): No; Supports fieldbus gateway (CMF): No; Power consumption: 3 W; Housing: Polycarbonate

Brief description: Small connection module for one sensor, 2 cable glands, 2 x M12 connector/socket for CAN, base for CMC600; Supported products: CLV61x - CLV65x Lector62x RFH6xx RFU62x; Cloning module support (CMC): Yes; Supports display module (CMD): No; Supports power supply module (CMP): No; Supports fieldbus gateway (CMF): No; Supply voltage: (10 V DC ... 30 V DC); Power consumption: 1 W

MINIATURE M16 IP40 CONNECTORS Binder; Snap-in locking system; Screw termination M16; 2 – 24 contacts; Degree of protection IP40; Shieldable versions

Brief description: Connection of a SICK sensor in a Power-over-Ethernet (PoE) environment. Splitting of PoE signal into 24 volt supply voltage and Ethernet.; Application: Indoor; Supported products: CLV62x  CLV63x  CLV64x  CLV65x  CLV69x  Lector series RFID read/write device; Connection type: 1   x “DEVICE” connection, 15-pin D-Sub HD female connector ( ) 1   x “Ethernet” connection, 8-pin RJ45 female connector 1   x “PoE IN” connection, 8-pin RJ45 female connector 1   x “I/O” connection, 5-pin M12 female connector, A-coded; Supply voltage: 48 V DC (42 V DC ... 57 V DC); Power consumption: < 4 W, If no devices are connected and without control of the signal LEDs; Power output: 21.5 W, Without operation of signal LEDs 19.5 W, During operation of a signal LED 17.5 W, During simultaneous operation of both signal LEDs; Housing: Aluminum, polypropylene