Connectors and cables Ranger CL cable SICK

Brief description: Connection device basic for connecting one sensor with 2 A fuse, 5 cable glands and RS-232 interface to sensor via M12, 17-pin female connector, all outputs available on screw/spring-loaded terminals.; Supported products: Lector series CLV62x - CLV64x (depending on type) CLV69x RFID read/write device InspectorP series; Cloning module support (CMC): Yes; Supports display module (CMD): No; Supports power supply module (CMP): No; Supports fieldbus gateway (CMF): No; Supply voltage: (10 V DC ... 30 V DC); Power consumption: 1 W

Brief description: Small connection module for one sensor, 4 cable glands (only for TiM3xx-10xxxxx); Supported products: TiM3xx; Cloning module support (CMC): No; Supports display module (CMD): No; Supports power supply module (CMP): No; Supports fieldbus gateway (CMF): No; Power consumption: 1 W; Housing: Polycarbonate

VALVE CONNECTOR TYPE B Binder; Series 220 solenoid valve connectors have a low housing and comply with design B DIN EN 175301-803.; Degree of protection IP65/IP67; Wired versions; Moulded versions

POWER CONNECTOR BAYONET IP40 Binder; These bayonet connectors comply with protection class IP40 and offer 3 to 12 contacts with a rated current of 5 A and 10 A; 3 – 12 contacts; Degree of protection IP40; Solder termination; Diameter 29 mm

Brief description: Connection of a SICK sensor in a Power-over-Ethernet (PoE) environment. Splitting of PoE signal into 24 volt supply voltage and Ethernet.; Application: Indoor; Supported products: CLV62x  CLV63x  CLV64x  CLV65x  CLV69x  Lector series RFID read/write device; Connection type: 1   x “DEVICE” connection, 15-pin D-Sub HD female connector ( ) 1   x “Ethernet” connection, 8-pin RJ45 female connector 1   x “PoE IN” connection, 8-pin RJ45 female connector 1   x “I/O” connection, 5-pin M12 female connector, A-coded; Supply voltage: 48 V DC (42 V DC ... 57 V DC); Power consumption: < 4 W, If no devices are connected and without control of the signal LEDs; Power output: 21.5 W, Without operation of signal LEDs 19.5 W, During operation of a signal LED 17.5 W, During simultaneous operation of both signal LEDs; Housing: Aluminum, polypropylene

UNSHIELDED CABLE Binder; Unshielded; 3, 4 and 5 contacts; 3, 4, 5, 6 and 8 contacts; Cable length 100 m

CONNECTOR POWER M25 Binder; Screw termination M25; 3 – 12 contacts; Degree of protection IP40; Solder termination

Brief description: Small connection module for one CLV41x; Supported products: CLV41x; Cloning module support (CMC): No; Supports display module (CMD): No; Supports power supply module (CMP): No; Supports fieldbus gateway (CMF): No; Power consumption: 3 W; Housing: Polycarbonate