The GGLL170T-B432S10 SICK is fiber-optic sensors, sensing range max depending on the optical fiber cable used, digital output NPN/PNP switching mode Light/dark switching, connection male connector M8, 4-pin, type of light visible red light, response time ≤ 250 µs, ≤ 50 µs. Compact fiber-optic sensing head design, suitable for applications with limited installation space and enabling easy operation.
| Functional principle | Fiber-optic amplifier |
| Device type detail | Stand-alone |
| Sensing range max | Depending on the optical fiber cable used |
| Type of light | Visible red light |
| Adjustment | Wire/pin For setting the sensing range Display + operating buttons For configuring the sensor parameters |
| Display | Display of sensor functions |
| Supply voltage | 10 V DC … 30 V DC |
| Digital output | NPN/PNP |
| Switching mode | Light/dark switching |
| Output current Imax | ≤ 100 mA |
| Response time | ≤ 250 µs, ≤ 50 µs |
| Switching frequency | 2 kHz, 10 kHz |
| Time functions | Switch-on delay, off delay, one shot, Without time delay |
| Delay time | Programmable, 0 ms … 9,999 ms |
| Dimensions (W x H x D) | 10 mm x 31.7 mm x 72.5 mm |
| Connection | Cable, 4-wire |
| Housing | Plastic, PC/POM |
| Enclosure rating | IP66 (EN 60529) |
| Ambient operating temperature | –25 °C … +55 °C |
| Vibration resistance | 10 Hz … 55 Hz (Amplitude 1 mm, 3 x 30 min (EN60068-2-6)) |
| Special applications | – |
🔗 View all genuine SICK products available at AUMI »»»
🔗 Discover other SICK Fiber optic sensor series »»»
🔗 View detailed specifications on the official SICK website »»»
