Indicators

Indicators LED-W11

  • Type of Display: LED
  • Input Current: 4-20 mA
  • Indication range: -1999 to 9999
  • Digit height: 14,2 mm
  • Protection class: IP65 / NEMA 4X
  • Typical accuracy: 0,05 % FS ±1 digit
  • Dimensions: 80 x 110 x 65 mm

Indicators

Indicators LCD-W11

  • Type of Display: LCD
  • Input Current: 4-20 mA
  • Indication range: -1999 to 9999
  • Digit height: 17,8 mm
  • Protection class: IP65 / NEMA 4X
  • Typical accuracy: 0,05 % FS ±1 digit
  • Dimensions: 80 x 110 x 65 mm

  • Type of Display: LED
  • Input Current: 4-20 mA
  • Approvals: ATEX
  • Indication range: -1999 to 9999
  • Digit height: 14,2 mm
  • Protection class: IP65 / NEMA 4X
  • Typical accuracy: 0,05 % FS ±1 digit
  • Dimensions: 125 x 80 x 63 mm

Indicators

Indicators LCD-H20

  • Type of Display: LCD
  • Input Current: 4-20 mA
  • Indication range: -1999 to 9999
  • Digit height: 12 mm
  • Protection class: IP20 (IP65 in connection head)
  • Typical accuracy: ±0.1 % of programmed span ±1 digit
  • Dimensions: Diameter 59 mm, height 20 mm

Indicators

Indicators LCD-H30

  • Type of Display: LCD
  • Input current: 4-20 mA
  • Indication range: -1999 till 9999
  • Digit height: 8,89 mm
  • Protection class: Up to IP68
  • Typical accuracy: 0,05 % FS ±1 digit
  • Material: Aluminum or stainless steel
  • Dimensions: 109 x 125 x 105 mm

Alarm units

Alarm Unit SR335

  • SR335 is designed for industrial temperature monitoring with Pt100 sensors in 2- or 3-wire connection.
  • Two output relays with individually adjustable trip functions are available.
  • LED’s in the front indicate alarm state and correct power supply.
  • Input from Pt100 sensors in 2- or 3-wire connection
  • Selectable, pre-calibrated temperature ranges
  • Two relay outputs with independent switch functions
  • Monostable relays for safe tripping at power failure
  • SPDT relays with 6 A switch capacity

Alarm units

Alarm Unit SR360

  • SR360 is designed for monitoring current and voltage signals in the process industry.
  • Two output relays with individually adjustable trip functions are available.
  • LED’s in the front indicate alarm state and correct power supply.
  • Current and voltage input
  • Two relay outputs with independent switch functions
  • Monostable relays for safe tripping at power failure
  • SPDT relays with 6 A switch capacity

Signal isolation

Isolators IsoPAQ-41P

  • Type of input: Active
  • No. of channels: 1 channel
  • Input signal: 0…20 mA 4…20 mA 0…10 V
  • Output signal: 0…20 mA 4…20 mA 0…10 V
  • Typical accuracy: 0,1 % FS
  • Isolation level: 4 kV, 50 Hz
  • Power supply: 20…253 VAC/DC
  • Cut-off frequency (-3 dB): > 1 kHz

Signal isolation

Isolators IsoPAQ-51P

  • Type of input: Active
  • No. of channels: 1 channel
  • Input signal: 0…20 mA 4…20 mA 0…10 V
  • Output signal: ±10 mA ±20 mA 0(2)…10 mA 0(4)…20 mA ±5 V ±10 V 0(1)…5 V 0(2)…10 V
  • Typical accuracy: 0,1 % FS
  • Isolation level: 4 kV, 50 Hz
  • Power supply: 20…253 VAC/DC
  • Cut-off frequency (-3 dB): 30 Hz/10 kHz switch select.

Signal isolation

Isolators IsoPAQ-60P

  • Type of input: Active
  • No. of channels: 1 channel
  • Input signal: 0…20 mA 4…20 mA 0…10 V
  • Output signal: ±10 mA ±20 mA 0(2)…10 mA 0(4)…20 mA ±5 V ±10 V 0(1)…5 V 0(2)…10 V
  • Typical accuracy: 0,1 % FS
  • Isolation level: 4 kV, 50 Hz
  • Power supply: 20…253 VAC/DC
  • Cut-off frequency (-3 dB): 30 Hz/10 kHz switch select.

Signal isolation

Isolators IsoPAQ-612

  • The input loop-powered isolator IsoPAQ-612 provides galvanic separation for 0(4) … 20 mA standard signals, while transferring the measurement signal to the output with a high degree of accuracy.
  • Input signal: 0(4)-20 mA
  • Output signal: 0(4)-20 mA
  • The IsoPAQ-612 requires no additional power supply since the auxiliary power is obtained from the input signal without distorting it.

Signal isolation

Isolators IsoPAQ-632

  • The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.
  • Input signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
  • Output signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
  • The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary