Switching automation light grids ELG
- Operating range: 1.5 m … 12 m
- Different beam resolutions 10 mm, 30 mm and 60 mm
- High immunity to ambient light when exposed to sunlight and reflective objects, eliminating false trips
- A high operating reserve increases application availability and reduces maintenance costs
- Optical synchronization enables quick installation and cost-effective connection
- The sensitivity adjustment enables trouble-free operation without reflection problems for the customer
At a glance:
- The sturdy light grid for many standard applications
- High immunity to ambient light when exposed to sunlight and reflective objects, eliminating false trips
- A high operating reserve increases application availability and reduces maintenance costs
- Optical synchronization enables quick installation and cost-effective connection
- The sensitivity adjustment enables trouble-free operation without reflection problems for the customer
Technical data:
- Operating range: 1.5 m … 12 m
- Length of cable: 5 m / 15 m
- Different beam resolutions 10 mm, 30 mm and 60 mm
- PNP/NPN, relay output and a test input
Features:
- Technology: Sender/receiver, Switching light grid
- Up to 128 beams
- Operating range: 1.5 m … 12 m
- Length of cable: 5 m / 15 m
- Different beam resolutions 10 mm, 30 mm and 60 mm
- Enclosure rating: IP65
- Potentiometer for sensitivity adjustment
- Ambient light immunity up to 150,000 lux
- Optical synchronization
Mechanics/ Electronics:
- Power supply: 15 V DC … 30 V DC
- Switching output: PNP/NPN, relay output and a test input
- Output mode: Q dark switching
- Connection type: Cable/ Male connector
- Housing material: Aluminum
- Temperature range: –35 °C to +55 °CDimensions:
Connection diagram:
You can download more at the document here: Download
Connection systems
- Connecting cables with female connector, M12, 4-pin
- Cable material: PVC
- Connector material: TPU
| Figure | Connection type head A | Connection type head B | Connecting cable | Locking nut material | Type |
Part no. |
 |
Female connector, M12, 4-pin, straight, unshielded |
Cable, open conductor heads |
2 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-G02M |
6009382 |
|
5 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-G05M |
6009866 |
|||
|
10 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-G10M |
6010543 |
|||
 |
Female connector, M12, 4-pin, angled, unshielded |
Cable, open conductor heads |
2 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-W02M |
6009383 |
|
5 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-W05M |
6009867 |
|||
|
10 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-W10M |
6010541 |
Related products
Transmittance dust Measuring Devices
- The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations
- For medium to high dust concentrations
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Monitoring of dust load in factory halls
- Control of fresh air and exhaust air units
Switching automation light grids
- Maximum range: 2 m
- Number of beams: 26
- Minimum detectable object (MDO): ≥ 2 mm
- The quick response time of the HLG allows the customer to use higher conveyor speeds
- The highest measurement resolution for the detection of very small objects on the conveying belt enables error-free operation in edge detection applications or when counting small objects.
Signal isolation
- The Bipolar Isolation Amplifier IisPAQ-661 is used for isolation and conversion of bipolar and unipolar industrial standard signals.
- Input Current (calibrated switchable): ±20 mA, 0… 20 mA, 4… 20 mA/ ±10 mA, 0… 10 mA, 2… 10 mA
- Input Voltage (calibrated switchable): ±10 V, 0… 10 V, 2 … 10 V/ ±5 V, 0… 5 V, 1 … 5 V
- Output Current (calibrated switchable): ±20 mA, 0… 20 mA, 4… 20 mA/ ±10 mA, 0… 10 mA, 2… 10 mA
- Output Voltage (calibrated switchable): ±10 V, 0… 10 V, 2 … 10 V / ±5 V, 0… 5 V, 1 … 5 V
Scattered light dust Measuring Devices
- The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas
- For very low to medium dust concentrations
- Gas sampling and return combined in one probe
- Contamination check
- Monitoring of wet gas scrubbing facilities
- Measurement in saturated gas downstream of desulfurization plants
- Determination of dust concentrations in wet exhaust air and in technological processes
Scattered light dust Measuring Devices
- The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content
- Emission monitoring which does not require permission in industrial systems
- Dust concentration measurements in exhaust gas ducts
- Monitoring of cloth filters for defective filter bags
- Ideal for monitoring electrostatic precipitators
- Dust monitoring in grinding and dosing systems
- Monitoring and regulation of fresh air and exhaust air systems
