Linear encoders STL/ETL70

Simple integration of the system thanks to the HIPERFACE® or HIPERFACE DSL® interface
STL70-2 certified according to SIL2 and PL d (HIPERFACE® interface)
Measuring lengths: up to 16,384 mm
High traversing speeds: up to 10 m/s

Part number:

Product	Part no.	Safety system	Communication interface	Enclosure rating	Number of pins	Product segment
ETL70-0KA4	1116913	No	HIPERFACE DSL^®	IP67	4-pin	Linear encoders, Motor feedback systems
STL70-0HA8	1116912	No	HIPERFACE^®	IP67	8-pin	Linear encoders, Motor feedback systems
STL70-2HA8	1135012	Yes	HIPERFACE^®	IP65	8-pin	Linear encoders, Motor feedback systems

At a glance:

The STL/ETL70 requires no reference run, meaning it is immediately ready for operation again after being switched off
Easy to mount thanks to a status LED that indicates the optimal mounting position of the motor feedback system
Can be installed in almost any position by rotating the M12 male connector
Maintenance-free due to non-contact measurement principle, therefore no machine downtimes due to wear and tear
Simple integration of the system thanks to the HIPERFACE® or HIPERFACE DSL® interface
High availability compared to optical systems – even with dust, contamination and moisture
STL70-2 certified according to SIL2 and PL d (HIPERFACE® interface)

Absolute measurement system for linear direct drives
Measuring lengths: up to 16,384 mm
High traversing speeds: up to 10 m/s
Status LED
Non-contact measurement system; reading distance to the magnetic tape: up to 0.8 mm
Electronic type label
ETL70 with one cable technology thanks to the HIPERFACE DSL® interface
STL70 with HIPERFACE® interface