Cold-dry Extractive gas analyzers
- The SIDOR is a gas analyzer for measurement of up to 2 infrared components
- Paramagnetic or electrochemical O2 measurement
- Automated adjustment with component-free ambient air
- Emission monitoring according to 13th (2001/80/EC) and 27th German Federal Emission Protection Directive (BImSchV).
- Combustion optimization of small boilers
- Monitoring of landfill gas and bio fermenters
- Operational measurements in power stations
Hot-wet Extractive gas analyzers
- CEMS solutions MCS100E HW
- Measured values: CH4, CO, CO2, H2O, HCl, N2O, NH3, NO, NO2, O2, SO2
- The MCS100E HW is an analyzer system for the extractive measurement of up to 8 IR active gas components.
- Emission monitoring in waste incineration plants
- Monitoring of incinerators with secondary fuels
- Flue gas monitoring in cement plants
- Emission monitoring in refineries
- Emission monitoring of land-based, heavy fuel fired diesel engine power plants
Hot-wet Extractive gas analyzers
- CEMS solutions MCS200HW
- The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
- Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
- Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
- Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
- SO3 monitoring in coal-fired power plants
1-phase power supplies
-
The DIMENSION family includes the widest range of 12 to 48V DIN rail power supplies. The products are classified in three series: Q , C and X with 1-, 2- or 3-phase input and a power of 80 to 960W.
-
Each series assembles various power supply models. Helpful special features like DC-OK relay contact, remote shut-down, spring clamps or DC wide-range input and important approvals are available for every series.
- Highest performance. Numerous variants. Full featured.
- Our product family DIMENSION is known for full featured DIN rail power supplies with the highest performance and numerous variants.
1-phase power supplies
- The product family PIANO stands for cost-efficient, basic DIN rail power supplies from 36-480W with high efficiency, long lifetime and compact size. Our PIANO products help you achieve more with less.
- The focus of the PIANO product family is on the basic functions without making compromises on PULS’ renowned qualities: efficiency, lifetime, reliability and small size. Additional and more complex features - such as power reserves - were deliberately omitted. This allows a cost-oriented design and high quality at the same time.
- The PIANO power supplies are perfectly suited for a wide range of economical applications. More demanding applications can be realised with the fully-featured DIMENSION products.
1-phase power supplies
-
The ultra-compact DIN rail power supplies of the MiniLine product family are made for low and medium power range from 15W to 100W.
-
The units, in their rugged plastic housing are highly efficient, compact, reliable and can be installed in seconds.
-
MiniLine users are convinced by an excellent cost-benefit ratio and a high power density. So a 30W device requires a space of only 22.5mm on the DIN-rail.
3-phase power supplies
- The decentralized FIEPOS power supplies with high protection classes IP54, IP65 or IP67 were developed for flexible use directly in the field.
-
With FIEPOS, short for FIEld POwer Supply, PULS presents a new type of power supply that was developed precisely for this environment.
- For 1-phase or 3-phase systems: 300W or 500W
3-phase power supplies
-
The DIMENSION family includes the widest range of 12 to 48V DIN rail power supplies. The products are classified in three series: Q , C and X with 1-, 2- or 3-phase input and a power of 80 to 960W.
-
Each series assembles various power supply models. Helpful special features like DC-OK relay contact, remote shut-down, spring clamps or DC wide-range input and important approvals are available for every series.
- Highest performance. Numerous variants. Full featured.
- Our product family DIMENSION is known for full featured DIN rail power supplies with the highest performance and numerous variants.
3-phase power supplies
-
The ultra-compact DIN rail power supplies of the MiniLine product family are made for low and medium power range from 15W to 100W.
-
The units, in their rugged plastic housing are highly efficient, compact, reliable and can be installed in seconds.
-
MiniLine users are convinced by an excellent cost-benefit ratio and a high power density. So a 30W device requires a space of only 22.5mm on the DIN-rail.
DC/DC Converters
-
The DIMENSION family includes the widest range of 12 to 48V DIN rail power supplies. The products are classified in three series: Q , C and X with 1-, 2- or 3-phase input and a power of 80 to 960W.
-
Each series assembles various power supply models. Helpful special features like DC-OK relay contact, remote shut-down, spring clamps or DC wide-range input and important approvals are available for every series.
- Highest performance. Numerous variants. Full featured.
- Efficient and reliable PULS DC/DC converters provide regulated DC voltages of 12V, 24V or 48V.
Power supplies with IO-Link
- The DIMENSION QT40.241-B2 sees PULS bringing to market the first 3-phase DIN rail power supply (24V / 40A) that makes this system data available to users via an I/O port.
-
Real-time information on power, temperature and status data is supplied directly from your power supply via IO-Link.
- This data can help increase system availability and reduce maintenance and operating costs. This means the power supply has the potential – in parallel with its function as a converter – to also act as a sensor and therefore make a significant contribution to the Industrial Internet of Things (IIoT).
Power over Ethernet
- Efficient 4-channel and 8-channel Power-over-Ethernet injectors for DIN rail mount.
- Available with an integrated 240W power supply or as stand-alone device.
- The 4- or 8-channel solutions are available with an integrated PULS high-end power supply or as standalone PoE injectors. Both devices feature a stable power of up to 30W per channel. This enables you to supply up to 8 PoE/PoE+ devices with only one injector.
