Scattered light dust Measuring Devices
- The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content
- Emission monitoring which does not require permission in industrial systems
- Dust concentration measurements in exhaust gas ducts
- Monitoring of cloth filters for defective filter bags
- Ideal for monitoring electrostatic precipitators
- Dust monitoring in grinding and dosing systems
- Monitoring and regulation of fresh air and exhaust air systems
Scattered light dust Measuring Devices
- The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations
- For very low to medium dust concentrations
- For small to medium duct diameters
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurements in exhaust gas or exhaust ventilation ducts
Scattered light dust Measuring Devices
- The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas
- For very low to medium dust concentrations
- Gas sampling and return combined in one probe
- Contamination check
- Monitoring of wet gas scrubbing facilities
- Measurement in saturated gas downstream of desulfurization plants
- Determination of dust concentrations in wet exhaust air and in technological processes
Ultrasonic
- Gas flow measuring instruments FLOWSIC100
- Integrated measurement via duct diameter for types H, M, and S
- Probe version PR for cost-saving, single-sided installation in duct
- No purge air required for applications with gas temperatures up to 260 °C
- Continuous emission measurement during power generation
- Emission monitoring in waste incineration plants
- Emission measurement in the processing industry (cement, iron and steel, glass)
- Emission monitoring in the chemical and hydrocarbon processing (HPI) industry
- Emission monitoring in the paper and textiles industry
- Flow measurements and process control in e. g., heating and ventilation systems
- The FLOWSIC100 Flare product family is designed for flare gas and steam flow measurements
- Innovative sensor design for very high gas velocities and gas temperatures up to 280 °C
- Control cycle for automatic self-diagnosis / signal optimization
- Emissions control for accounting of CO2 emissions
- Detection of flare gas leaks
- Measurement of steam flow
- Monitoring of steam injection when burning flare gas
- Monitoring of gas losses
- Exact mass balance and process optimization
Pitot tube
- A Pitot tube flow velocity measuring device
- The SMC222 series Pitot tube flow velocity measuring device is suitable for measuring the flow of steam, air, and other such mediums
- Provides users with a standard 4 ... 20 mA output proportional to the flow rate
- Online measurement of industrial boiler fuel gas emissions
- Managing flow rate of mediums such as steam or air, especially useful for measuring flow rate in large-diameter ducts
In-situ gas analyzers
- In-situ gas analyzers GM32
- The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3
- No gas sampling, no gas transport, no gas conditioning
- Up to eight measuring components at the same time, plus process temperature and pressure
- DOAS and CDE evaluation process
- Numerous independent measuring ranges with consistent accuracy
- Automatic self-test function (QAL3) without test gases
- Overpressure encapsulated design for ATEX Zones 1 and 2
- For monitoring and control in flue gas purification,such as denitrification plants, desulfurization plants and converters
- Emissions monitoring according to EU directives or local regulations
- TRS emissions monitoring in the Kraft pulp industry.
In-situ gas analyzers
- In-situ gas analyzers GM35
- Simultaneous or as individual measurement: the GM35 gas analyzer measures CO2, H2O and CO, or N2O, as well temperature and pressure
- No gas sampling and conditioning
- Gas testable version of measuring probe available
- Emission monitoring according to EN 14181, e. g., in power or cement plants
- Monitoring of the combustion efficiency in hazardous waste incineration
- Process monitoring in urea production
In-situ gas analyzers
- In-situ gas analyzers Zirkor200
- SICK’s ZIRKOR200 gas analyzer provides very robust, reliable, and suitability-tested oxygen measurement for small and large combustion plants
- Electrochemical cell with extremely long service life due to innovative protection mechanisms
- Fully automated adjustment mechanism integrated into the control unit
- ZIRKOR remote app for remote access to the analyzer
- Suitability-tested according to EN 15267
- Ex version for ATEX/IECEx, Zone 1 and Zone 21
- Oxygen monitoring for process control
- Monitoring of inert gas atmospheres
In-situ gas analyzers
- In-situ gas analyzers GM700
- The GM700 is able to measure several gas components, such as NH3, HF, HCl or H2O
- High selectivity due to high spectral resolution
- Overpressure encapsulated design for ATEX Zone 2
- Ammonia slip measurement in DeNOx plants
- Emission monitoring of hydrogen fluoride in aluminum smelters
- Ammonia measurement in exhaust gas of combustion engines
- Ammonia measurement in composting or waste incineration plants
- HCI measurement in combustion plants
Cold-dry Extractive gas analyzers
- Extractive gas analyzers GMS800
- Measured values: Ar, CH4, CH3OH, C2H2, C2H2F4, C2H4, C3H6, C3H8, C4H6, Cl2, CO, CO2, COCl2, COS, CS2, H2, H2S, He, NH3, NO, N2O, NO2, O2, SF6, SO2, other components on request
- Emission monitoring according to EN 15267 and process gas measurements, including in potentially explosive atmospheres
- Emission monitoring of very low concentrations
- Measurement of smallest concentrations of NO, NO2, and SO2
- NOx monitoring by direct measurement of NO and NO2
- Measurement of sulfur compounds in process gases
- CO monitoring for explosion protection
- Measurement of smallest concentrations in hydrogen or hydrocarbons
Cold-dry Extractive gas analyzers
- Extractive gas analyzers S700
- Measured values: Ar, CBrF3, CClF3, CCl2F2, CCl3F, CHClF2, CHCl3, CH2Cl2, CH2O, CH3Cl, CH3OH, (CH3)2O, CH4, CO, CO2, CS2, C2Cl2F4, C2Cl3F3, C2Cl4, C2HCl3, C2H2, C2H2Cl2, C2H2F4, C2H3Cl3, C2H4, C2H4Cl2, C2H5OH, C2H6, C3H4, C3H6, C3H7OH, C3H8, C3H8O2, C4H6, C4H8, C4H10, C4H8O, C4H9OH, C5H12, C6H10O, C6H12, C6H14, C7H16, C7H8, C8H10, He, H2, H2O, NH3, NO, N2O, O2, SF6, SO2
- S710 19" rack for analyzer cabinets and standard applications
- S715 wall-mounting enclosure for harsh application conditions and zone 2 explosive environment (ATEX)
- S720 flame-proof housing for zone 1 explosive environment (ATEX)
