Fiber Optic Sensor GLL70P-1HTGY1DZZZZZ1Z1 SICK– PNP/NPN Open Collector Fiber Amplifier
Overview:
The GLL70P-1HTGY1DZZZZZ1Z1 is a stand-alone fiber optic amplifier from SICK’s GLL70 series. The device supports flexible PNP/NPN Open Collector outputs, ultra-fast response times starting from 50 µs (10 kHz), and 6 Smart Task Timer modes with delays up to 30 seconds. It is an ideal solution for high-speed detection, complex signal delay processing, and synchronization in industrial automation environments.
Product Overview of the Fiber Optic Sensor GLL70P-1HTGY1DZZZZZ1Z1
The GLL70P-1HTGY1DZZZZZ1Z1 is a stand-alone fiber optic amplifier in SICK’s GLL70 series. It is designed to work with compatible fiber optic probes for detecting small objects or in confined installation spaces. Featuring an easy-to-use OLED display, menu-selectable PNP/NPN Open Collector outputs, four flexible response time levels, and 6 Smart Task Timer modes, this model delivers high optimization for signal processing in quality inspection systems, packaging, electronics, semiconductors, and precision automation. The integrated 4-wire 2 m cable connection ensures neat installation, making it particularly suitable for control cabinets.
Key Features:
- Output: PNP or NPN open collector (selectable via menu)
- Response time: ≤50 µs │ ≤250 µs │ ≤1,000 µs │ ≤4,000 µs
- Switching frequency: 10 kHz │ 2 kHz │ 500 Hz │ 31.25 Hz
- Smart Task timer: 6 modes, programmable 0–30,000 ms
- Connection: Integrated 4-wire 2 m cable │ Protection rating: IP50 (EN 60529)
Technical Specifications of GLL70P-1HTGY1DZZZZZ1Z1
| Parameter |
Value |
| Model |
GLL70P-1HTGY1DZZZZZ1Z1 |
| Part Number |
6087429 |
| Device type |
Fiber-optic amplifier, Stand-alone |
| Light source |
Visible red LED, wavelength 660 nm |
| LED service life |
100,000 hours at Ta = +25 °C |
| Supply voltage |
10 V DC … 30 V DC |
| Ripple |
± 10 % |
| Current consumption |
≤ 50 mA (no load) |
| Digital outputs |
1 (+ 1 digital input) |
| Output type |
PNP or NPN open collector (selectable via menu) |
| Switching mode |
Light/dark switching |
| Maximum output current |
≤ 100 mA |
| Response time |
≤ 50 µs │ ≤ 250 µs │ ≤ 1,000 µs │ ≤ 4,000 µs |
| Switching frequency |
10 kHz (at 1:1 light/dark ratio) │ 2 kHz │ 500 Hz │ 31.25 Hz |
| Smart Task timer |
Switch-on delay, off delay, ON and OFF delay, impulse (one shot), switch-on delay + pulse, Deactivated |
| Delay time |
Adjustable via pushbuttons, 0 ms … 30,000 ms |
| Connection |
4-wire cable, 2 m |
| Dimensions (W × H × D) |
10.7 mm × 33.3 mm × 82.1 mm |
| Weight |
Approx. 74 g |
| Housing |
Plastic, PC |
| Protection rating |
IP50 (EN 60529) |
| Operating temperature |
–25 °C … +55 °C |
| Storage temperature |
–40 °C … +70 °C |
| Ambient light immunity |
Artificial light: ≤ 16,000 lx
Sunlight: ≤ 67,000 lx |
| MTTFD |
581.5 years |
| Certifications |
EU/UK/ACMA/Moroccan CoC, China RoHS, CCC Exempt, cRUus, IEC EN 62471 |
Source: SICK Data Sheet for GLL70P-1HTGY1DZZZZZ1Z1 (Part No. 6087429). Download datasheet link.
Industrial Applications of the GLL70P-1HTGY1DZZZZZ1Z1
The GLL70P-1HTGY1DZZZZZ1Z1 is suitable for applications requiring complex timers, open collector outputs, and flexible response times ranging from ultra-fast to ultra-slow. Typical applications include:
- Electronics & semiconductor assembly lines: Response time ≤50 µs and 10 kHz switching frequency enable detection of extremely small components (SMDs, IC chips) at high speeds. PNP or NPN Open Collector outputs ensure compatibility with various PLC control architectures and signal systems.
- Low-speed quality inspection systems: The ≤4,000 µs response mode (31.25 Hz) reduces noise and increases stability when detecting objects under high ambient light conditions (up to 16,000 lx artificial light and 67,000 lx sunlight).
- Applications requiring simultaneous ON & OFF delay: The unique ON and OFF delay mode of the GLL70P creates a precise detection window, ideal for packaging machines with complex surfaces or production lines that need to eliminate leading/trailing edge noise signals.
- Control cabinets and pre-integrated equipment: The integrated 2 m cable simplifies wiring inside control panels and eliminates the risk of loose M8 connectors in vibrating environments.
- Pharmaceutical & analysis industries: The switch-on delay + pulse mode generates precisely timed output pulses, suitable for camera inspection triggers or inline signal synchronization with analysis equipment.
Comparison: GLL70P-1HTGY1DZZZZZ1Z1 vs GLL170T-B434
| Criteria |
GLL70P-1HTGY1DZZZZZ1Z1 |
GLL170T-B434 |
| Part Number |
6087429 |
6063341 |
| Output type |
PNP or NPN open collector (menu selectable) |
PNP or NPN |
| Response time |
≤50 / ≤250 / ≤1,000 / ≤4,000 µs |
≤250 µs / ≤50 µs |
| Switching frequency |
10 kHz / 2 kHz / 500 Hz / 31.25 Hz |
10 kHz / 2 kHz |
| Smart Task timer |
6 modes, 0–30,000 ms |
4 modes, 0–9,999 ms |
| Connection |
4-wire cable, 2 m |
M8 4-pin connector |
| Protection rating |
IP50 |
IP66 |
| MTTFD |
581.5 years |
300 years |
| Weight |
~74 g |
22 g |
| Operating temperature |
–25 °C … +55 °C |
–25 °C … +55 °C |
Conclusion: The GLL70P-1HTGY1DZZZZZ1Z1 is best suited for applications requiring multiple timer modes, highly flexible response times, and advanced signal processing. The GLL170T-B434 is more appropriate for harsh industrial environments demanding IP66 protection, M8 connectivity, and a more compact design.
Frequently Asked Questions (FAQ)
Q1. Does the GLL70P-1HTGY1DZZZZZ1Z1 use PNP or NPN output?
The model supports both PNP and NPN Open Collector outputs. Users can select the desired type directly in the device’s configuration menu.
Q2. What is the fastest response time of the GLL70P-1HTGY1DZZZZZ1Z1?
The device supports a fastest response time of ≤50 µs with a maximum switching frequency of 10 kHz, making it suitable for high-speed detection applications.
Q3. What Smart Task modes does the GLL70P-1HTGY1DZZZZZ1Z1 offer?
The device supports 6 modes: Switch-on Delay, Off Delay, ON & OFF Delay, Impulse (One Shot), Switch-on Delay + Pulse, and Deactivated.
Q4. Does the GLL70P-1HTGY1DZZZZZ1Z1 meet IP66 standards?
No. This model has an IP50 rating and is suitable for installation inside control cabinets or environments protected from direct dust and water exposure.
Q5. What are the main differences between the GLL70P-1HTGY1DZZZZZ1Z1 and the GLL170T-B434?
The GLL70P offers more timer modes, supports 4 response time levels, and provides delays up to 30,000 ms. The GLL170T-B434 stands out with its IP66 rating, M8 connector, and more compact design.
Contact for Purchasing the Fiber Optic Sensor GLL70P-1HTGY1DZZZZZ1Z1
AUMI – Official authorized distributor of SICK in Vietnam. Full manufacturer warranty, complete CO/CQ documentation, and 24/7 technical support.
📞 Hotline: 0917 991 589 (Hanoi) | 0932 226 100 (Ho Chi Minh City)
📧 Email: [email protected] 🌐 Website: https://aumi.com.vn/
Addresses:
- Hanoi: B44, Villa Lot, Viet Hung Urban Area, Viet Hung Ward
- Ho Chi Minh City: 2nd Floor, HS Building, 260/11 Nguyen Thai Binh, Bay Hien Ward
- Da Nang: 9th Floor, PV Bank Building, No. 2 30-4 Street, Hoa Cuong Ward
