Isolators IsoPAQ-612 INOR; 2-channel Loop Powered Isolator for separation of 0(4)-20 mA Signals; No. Of channels: 2 channels; Isolation level: 3 kV; Typical accuracy: 0,1% FS; Working voltage: 600 VAC/DC
| Input | |
| Input signal | 0(4)-20 mA |
| Start-up current | < 200 mA |
| Voltage drop | Ca. 2.3 V at 20 mA |
| Overload | ≤ 50 mA, 30 V |
| Output | |
| Output signal | 0(4)-20 mA |
| Load | 600 Ω |
| Response time T99 | 5 ms |
| Residual ripple | < 10 mVrms |
| Transmission error | < 0.1 % full scale |
| Load error | < 0.05 % of measured value / 100 Ω load |
| Temperature coefficient | < 100 ppm/K |
| Test voltage | 3 kV AC, 50 Hz, 1 min. all circuits against one another |
| Working voltage (Basic insulation) | 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 |
| Protection against electrical shock | Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits. |
| Ambient temperature | Operation: – 25 to + 70 °C (– 13 to + 158 °F) Transport and Storage: – 40 to + 85 °C (– 40 to + 185 °F) |
| EMC | EN 61326-1 |
| Construction | 62 x 96,5 x 107 mm , protection class IP 20, mounting on 35 mm DIN rail acc. to EN 60715 |
| Weight | Approx. 70 g |
