Indicators LCD-W110 INOR; Type of display: LCD; Input current: 4-20 mA; Indication range: 4 digits (-1999 to 9999); Typical accuracy: 0.05 % FS ±1 digit; Protection: IP65 / NEMA 4X
| Type of display | LCD |
| Input current | 4-20 mA |
| Maximum current | 30 mA |
| Minimum current for operation | ~3.5 mA |
| Voltage drop | 4.2 V |
| Display | 7-segment black LCD with clear background |
| Backlight | White LED powered from the 4-20 mA loop |
| Indication range | 4 digits (-1999 to 9999) |
| Digit height | 17,8 mm / 0.7″ |
| Decimals | Selectable, 0 to 3 |
| Under range / Over range | Flashing symbols Lo (I ≤ 3.6 mA) / HI (I ≥ 21.0 mA) |
| Engineering units | Set of self-adhesive labels included for units: °C, °F, mA, mV, V, bar, mbar, Pa, kPa, MPa, pH, %, s, ms, μs, mm, cm, m |
| Response time | Appr. 1 s; Power on delay: 5 s and stable after 1 min |
| Temperature influence | ≤ ±0.01 % FS / °C |
| Configuration method | 3 push buttons or NFC, located on the rear of the display |
| Operation temperature | -20 to +70 °C / -4 to +158 °F |
| Typical accuracy | 0.05 % FS ±1 digit |
| Dimensions | 80 x 110 x 65 mm / 3.15 x 4.33 x 2.56” |
| Protection | IP65 / NEMA 4X |
| Connections | Push-in spring connection AWG 24-16 |
| NAMUR NE 43 compliance | Yes |
| HART transparent | Yes |
| Mounting | Wall, 35 mm DIN rail acc. to EN 60715 or 50-65 mm (2-2.55”) pipe with mounting kit |
🔗 View all INOR products at AUMI »»»
