| Product | Part no. | Beam separation | Operating range | Detection height | Response time |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 120 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 210 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 810 mm | < 100 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 420 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 270 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 360 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 60 mm | 0.35 m | 60 mm | 5 ms |
| PLG3-360F431 | 1029131 | 60 mm | 0.35 m | 60 mm | 5 ms |
| PLG6-060F434 | 1051978 | 60 mm | 0.35 m | 60 mm | 5 ms |
Automation light grids PLG
- Simply clever order picking verification
- The PLG is mounted at each storage bay and has an integrated job LED to display pick position. The PLG’s single-sided reflector strip saves space in the bin and reduces damage and installation costs.
- The integrated job LED reduces the order picker’s search time
- Scanning range up to 2 m
At a glance:
- Simply clever order picking verification
- The integrated job LED reduces the order picker’s search time
- Low mounting costs thanks to the clever mounting concept
- High availability thanks to an integrated polarizing filter
- Robust aluminum housing ensures that sensor damage is kept to a minimum and helps save on repair costs
- Reflective tape on the sensor cuts out additional mounting and cabling costs
Features:
- 360° visible job LED
- Scanning range up to 2 m
- Flexible monitoring heights from 120 mm to 420 mm
- Immune to reflected and ambient light
- Switchable job LED: permanently lit or flashing
- Optically confirms correct access
Related products
- The FLG (frame light grid) switching automation light grid is the innovative solution in which the sender and receiver are combined in one housing for the detection of small parts.
- In dynamic operating mode, the FLG performs reject and removal control of workpieces in pressing and punching machines and also supports the packaging process.
- In static operating mode, it can be used for monitoring thread breakage.
- With a monitored area of 200 mm x 250 mm or 200 mm x 120 mm, it allows detection of small parts down to minimum dimensions of 2 mm over a large area.
Motion control sensors
- Inclination measurement in two axes without mutual interference
- Reliable output signal thanks to configurable digital filter
- High resolution (0.01°) and accuracy (±0.1° typ.)
- Programmable with the PGT-12-Pro
- Special housing for rapid mounting and adjustment
- Dual sensors detect double columns of marks
- Tight dual-sensor mounting ability
- Detects 1-18 marks of different colors
- Quickly and easily mounted on the side or from above in T-slots without dismantling the cylinder end caps
- Simple commissioning without time-consuming parameterization
- Repeatability: 0.05 mm
- Analog interface: 0 V to 10 V
- Housing length: 32.5 mm
- The smart solution for challenging detection tasks
- With the WLL80 opto-electronic fiber optic amplifier, SICK is creating a new generation of amplifiers for the flexible integration of fiber optics in confined spaces.
- The intelligent WLL80 features IO-Link and can make processes even more efficient with various Smart Tasks. Thanks to IP54, it is protected from dust and spray water during operation. Continuous threshold adaptation ensures good performance in the long term with minimal maintenance requirements.
- In addition to a fast response time and high detection range, it is characterized by flexible and user-friendly parameterization via the OLED display or IO-Link. Whether as a single or bus version, the WLL80 is suitable for a wide range of applications thanks to its extensive fiber optics portfolio.
