- k-Value: 0 – 10,00 m-1
- Density: 0 – 100%
- Soot mass concentration: 0 – 844 mg/m3
- RPM: 360 – 8000 min-1
- Oiltemperature: 0 – 150 °C
- Operation Temperature: 5 – 45 °C
- Calibration: automatically(Light-Dark-Test)
- Operating Voltage: 230 V/50 Hz; 12 V DC
- Interfaces: Bluetooth/ RS 232
- Dimensions(B x H x T): 585 mm x 230 m x 161 mm
- Mass: ca. 10 kg
Exhaust Gas Analyser Opacilyt 1030
- Compact workshop instrument for performing the AU on diesel vehicles
- with speed sensing for conventional vehicles
- with the Bluetooth OBD module for modern OBD vehicles
- Future proof for Euro 6 vehicles
- Opacilyt 1030 and OBD interface of the vehicle are connected to the PC / laptop
- AU software with integrated AU target database also available for commercial vehicles
At a glance:
- OBD-Module Bluetooth
Extension for wireless AU with the OBD module BT 02 for cars and trucks to communicate with the vehicle connected via Bluetooth to a PC / Notebook
- OBD – Protocols
ISO DIS 14230-4 (kW 2000)
ISO 9141-2
SAE J1850 (Modi PWM und VPM)
ISO DIS 15765-4 (CAN)
SAE J1939
WWH ISO 27145
Technical data:
- k-Value: 0 – 10,00 m-1
- Density: 0 – 100%
- Soot mass concentration: 0 – 844 mg/m3
- RPM: 360 – 8000 min-1
- Oiltemperature: 0 – 150 °C
- Operation Temperature: 5 – 45 °C
- Calibration: automatically(Light-Dark-Test)
- Operating Voltage: 230 V/50 Hz; 12 V DC
- Interfaces: Bluetooth/ RS 232
- Dimensions(B x H x T): 585 mm x 230 m x 161 mm
- Mass: ca. 10 kg
You can download more at the document here: Download
Related products
Transmittance dust Measuring Devices
- The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations
- For medium to high dust concentrations
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Monitoring of dust load in factory halls
- Control of fresh air and exhaust air units
Hot-wet Extractive gas analyzers
- CEMS solutions MCS200HW
- The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
- Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
- Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
- Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
- SO3 monitoring in coal-fired power plants
Signal isolation
- The Bipolar Isolation Amplifier IisPAQ-661 is used for isolation and conversion of bipolar and unipolar industrial standard signals.
- Input Current (calibrated switchable): ±20 mA, 0… 20 mA, 4… 20 mA/ ±10 mA, 0… 10 mA, 2… 10 mA
- Input Voltage (calibrated switchable): ±10 V, 0… 10 V, 2 … 10 V/ ±5 V, 0… 5 V, 1 … 5 V
- Output Current (calibrated switchable): ±20 mA, 0… 20 mA, 4… 20 mA/ ±10 mA, 0… 10 mA, 2… 10 mA
- Output Voltage (calibrated switchable): ±10 V, 0… 10 V, 2 … 10 V / ±5 V, 0… 5 V, 1 … 5 V
2-wire Transmitters
- Type: Rail-mounted
- Input: RTD; Thermocouple
- Input RTD: Pt100, Pt1000, Ni100, Ni120, Ni1000, Cu10
- Input Thermocouple: Type B, C, E, J, K, L, N, R, S, T, U
- Output: 4-20 mA
- Isolation: Unisolated
- Measuring channels: 1 channel
- Sensor connection: 3-, 4-wire connection
- Typical accuracy: 0.15% of span
Fuel, Gas & Oil Valves
- Valve Actuation: Solenoid
- Body Material: Aluminum
- Media: Natural Gas
- The ASCO Series 043 are 2-way, normally closed gas shutoff valves for on-off control of fuel gas in commercial and industrial gas burners.
- Standards / Regulations: CSA, FM, Type 1, UL, Type 4
