At a glance:
- The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations
- Installation from one side
- For very low to medium dust concentrations
- Automated check of zero and reference point
- Contamination check
- Hastelloy measuring probe available for corrosive gases
- For small to medium duct diameters
- Device version for explosive zone 2/22 or 1/21
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurements in exhaust gas or exhaust ventilation ducts
Please note: The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications
Technical data:
DUSTHUNTER SP100 system
- Measured values: Scattered light intensity, dust concentration (after gravimetric comparison measurement)
- Performance-tested measurands: Scattered light intensity
- Measurement principles: Scattered light forward
- Spectral range : 640 mm … 660 mm, Laser, protection class 2, power < 1 mW
- Measuring ranges: Dust concentration 0 … 5 mg/m³ / 0 … 200 mg/m³, Higher measuring ranges on request
- Certified measuring ranges: Dust concentration 0 … 7.5 mg/m³ / 0 … 10 mg/m³ / 0 … 15 mg/m³ / 0 … 50 mg/m³ / 0 … 100 mg/m³ / 0 … 200 mg/m³ / 0 … 500 mg/m³
- Response time (t90): 1 s … 600 s, Freely adjustable
- Accuracy: ≤ 2 %, Of measuring range full scale
- Process temperature:
Standard version DHSP-T2xx: –40 °C … +220 °C
High temperature version DHSP-T2xx: –40 °C … +400 °C
- Process pressure:
With MCU-P control unit: –50 hPa … 10 hPa
With external purge air unit: –50 hPa … 30 hPa
With instrument air (provided by the customer): –100 hPa … 100 hPa
- Process gas humidity: Non-condensing
- Duct diameter: ≥ 0.25 m
- Conformities: Approved for plants requiring approval
2001/80/EC (13. BImSchV)
2000/76/EC (17. BImSchV)
27. BImSchV
TA-Luft (Prevention of Air Pollution)
EN 15267
EN 14181
MCERTS
2010/75/EU
U.S. EPA PS-11 compliant
- Electrical safety: CE
- Test functions:
Automatic self-test (linearity, contamination, drift, aging)
Contamination limit values: Warning at 30%; fault at 40%
Manual linearity test with reference filter
Dimensions:
Connection diagram: