AUMI company has installed and configured the Safety laser scanner S3000 safety sensor of SICK company for safety application to protect operators in the factory in Vietnam.
The S3000 safety scanner is installed to protect the operator during machine inspection.
The laser scanner creates a safe 2D scan surface. When any object or person enters the area protected by the laser scanner. The output signal will allow the machine to stop promptly and alarm when people and objects enter the operating area of the equipment in the line. For example, lathes, cutting machines, stamping machines, winding machines can cause injury to people.
=> Safety Laser scanner S3000 helps protect the operator from those agents
Device type and characteritics:
- Safety Laser scanner S3000 by SICK
- Integrated safety standards Type 3 (IEC 61496), SIL 2 (IEC 61508), PL d (EN ISO 13849).
- 2xOSSD output can protect against short circuit and short circuit. Therefore, they can be completely integrated into safety assurance systems.
- The device operates according to the time-of-flight measurement principle. The device emits very short light pulses (transmitted light pulse). If the light strikes an object, the object reflects the light which is then received by the safety laser scanner (received light pulse)
- Material is Aluminum die cast.
- 190° scanning angle
- Increased dust and particle tolerance due to dazzle and particle algorithms
- Sensor heads with a scanning range up to 4 m, 5.5 m or 7 m (maximum radii of the protective field)
Technical information S3000
- Protection range 4m/ 5m/ 7m.
- Scanning resolution: 0.5°, 0.25°
- Functions: Reset, EDM,…
- Weight: 3.3 kg
- Safety standards Type 3 (IEC 61496), SIL 2 (IEC 61508), PL d (EN ISO 13849).
