Level sensor
- Measurement principle: Vibrating level switch
- Medium: Fluids
- Process temperature up to 150 °C
- Pipe extension up to 1,200 mm
- Housing made of 316L stainless steel
- Output signal: Non-contact switch/ Transistor output PNP/ Transistor output PNP with IO-Link
Level sensor
- Measurement principle: Vibrating level switch
- Medium: Fluids
- Process temperature: –50 °C ... +250 °C, See safety notes for ATEX devices
- Output signal: Non-contact switch/ Double relay (DPDT)/ 1 x PNP/NPN/ NAMUR signal
- Immune to deposit formation
- Hygienic designs according to EHEDG and FDA, compatible for CIP and SIP
- ATEX approval available
Level sensor
- Measurement principle: Vibrating level switch
- Medium: Bulk solids
- Process temperature: –50 °C ... +250 °C, Temperature range with temperature adapter, detection of solids in water, Temperature adapter
- Output signal: Non-contact switch/ Double relay (DPDT)/ 1 x PNP/NPN/ NAMUR signal
- ATEX certifications (1D/2D/1G/2G) available
Level sensor
- Measurement principle: Ultrasonic sensor
- Medium: Fluids, bulk solids
- Measurement: Switch, Continuous
- Process temperature: –25 °C ... +70 °C
- Output signal: 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V/ 2 x PNP/ 2 x NPN/ Push-pull: PNP/NPN; IO-Link 1.1
- Converter protected by PVDF cover for increased resistance
- 3-in-1: Continuous measurement, switching signal, and display
Level sensor
- Measurement principle: Ultrasonic sensor
- Medium: Fluids
- Measurement: Switch, Continuous
- Process temperature: –25 °C ... +85 °C
- Output signal: 1 x PNP + 4 mA ... 20 mA / 0 V ... 10 V/ 4 mA ... 20 mA/ 4 mA ... 20 mA, 2-wire
- Non-contact measurement in immersion pipe of up to 1,500 mm
- PTFE-coated membrane and GF D40 process connection made of PTFE
