Motor feedback systems
- The stand-alone version is ideally suited as a master and path encoders.
- The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market.
- Integrated version and stand-alone design.
- Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...).
Motor feedback systems
- Its small dimensions allow manufacturers of small and very small motors to achieve a significant reduction in the length of their motors.
- The SEK/SEL37 motor feedback systems are particularly suitable for use under harsh ambient conditions.
- Electronic type label.
- HIPERFACE® interface.
- RoHS-compliant.
Motor feedback systems
- Highly cost-effective and ideal for standard applications
- Easy operation.
- High resilience, even when used in mobile applications.
- 36 mm housing diameter, 22 mm length, and 6 mm diameter blind hollow shaft allow it to be installed even in small servo motors.
Motor feedback systems
- EDS/EDM35 motor feedback systems are ideal for use in high-precision, dynamic applications
- Optical motor feedback system with HIPERFACE DSL®
- Up to 24-bit resolution per revolution and 4,096 revolutions with the multiturn system
- Certified according to SIL2 and PL d
Motor feedback systems
- Integrated mechanical multiturn function for additional measuring of revolutions without external battery
- Direct mounting on the drive shaft renders transmission components such as timing belts or couplings unnecessary
- HIPERFACE® interface with extended type label
- Maximum speed: 6,000 rpm and 8,500 rpm
Motor feedback systems
- The compact design enables simple integration into the motor assembly area.
- Thanks to the external temperature input, additional temperature values can be transmitted via the HIPERFACE-DSL® protocol – additional cabling is not required
- Enclosure rating: IP00
- Input connector: Male connector, 8-pin
- Output connector: Male connector, 4-pin
Motion control sensors
- Increase in dynamics and PSDI times due to the elimination of mechanical components, such as belts
- Bearing-free technology maximizes the service life and machine availability of the overall system
- Resolutions up to 12,672 measurement steps per revolution
- Accuracy of up to ± 0.05°
- For hollow shaft diameters from 30 mm to 500 mm
