| Product | Part no. | Beam separation | Operating range | Detection height | Response time |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 120 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 210 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 810 mm | < 100 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 420 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 270 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 30 mm | 1.3 m | 360 mm | < 80 ms |
| PLG3-120F431 | 1028953 | 60 mm | 0.35 m | 60 mm | 5 ms |
| PLG3-360F431 | 1029131 | 60 mm | 0.35 m | 60 mm | 5 ms |
| PLG6-060F434 | 1051978 | 60 mm | 0.35 m | 60 mm | 5 ms |
Automation light grids PLG
- Simply clever order picking verification
- The PLG is mounted at each storage bay and has an integrated job LED to display pick position. The PLG’s single-sided reflector strip saves space in the bin and reduces damage and installation costs.
- The integrated job LED reduces the order picker’s search time
- Scanning range up to 2 m
At a glance:
- Simply clever order picking verification
- The integrated job LED reduces the order picker’s search time
- Low mounting costs thanks to the clever mounting concept
- High availability thanks to an integrated polarizing filter
- Robust aluminum housing ensures that sensor damage is kept to a minimum and helps save on repair costs
- Reflective tape on the sensor cuts out additional mounting and cabling costs
Features:
- 360° visible job LED
- Scanning range up to 2 m
- Flexible monitoring heights from 120 mm to 420 mm
- Immune to reflected and ambient light
- Switchable job LED: permanently lit or flashing
- Optically confirms correct access
Related products
- Detection of magnetic lines for line guidance
- The sensor reliably differentiates between up to three lanes
- Resolution 1 mm, repeatability 1 mm
- CANopen, Modbus RTU RS-485
- Rugged aluminum housing
- Easy installation: Thin housing design and different measurement area variants
- No supplementary Ethernet gateway required with Ethernet models – lowers costs
- The CLV62x scanner can be used as a multiplexer in any CAN scanner network from SICK – no supplementary multiplexer necessary
- SMART620 code reconstruction technology
- High scanning frequency of up to 1,200 Hz
- IP 65 or IP 69K rated (depending on type)
- The smart solution for challenging detection tasks
- With the WLL80 opto-electronic fiber optic amplifier, SICK is creating a new generation of amplifiers for the flexible integration of fiber optics in confined spaces.
- The intelligent WLL80 features IO-Link and can make processes even more efficient with various Smart Tasks. Thanks to IP54, it is protected from dust and spray water during operation. Continuous threshold adaptation ensures good performance in the long term with minimal maintenance requirements.
- In addition to a fast response time and high detection range, it is characterized by flexible and user-friendly parameterization via the OLED display or IO-Link. Whether as a single or bus version, the WLL80 is suitable for a wide range of applications thanks to its extensive fiber optics portfolio.
- Extremely small housing saves installation space, thereby increasing efficiency of the system
- Reduced storage costs, flexible machine design and easier service
- Yellow LED as optical adjustment indicator and output state display
- Green LED acts as a status indicator
- IO-Link and automation functions
- Quickly and easily mounted on the side or from above in T-slots without dismantling the cylinder end caps
- Simple commissioning without time-consuming parameterization
- Repeatability: 0.05 mm
- Analog interface: 0 V to 10 V
- Housing length: 32.5 mm
