1. Sick »
  2. Motion control sensors »
  3. Motor feedback systems »
  4. Motor feedback systems SEK/SEL »

Motor feedback systems SEK/SEL

  • Its small dimensions allow manufacturers of small and very small motors to achieve a significant reduction in the length of their motors.
  • The SEK/SEL37 motor feedback systems are particularly suitable for use under harsh ambient conditions.
  • Electronic type label.
  • HIPERFACE® interface.
  • RoHS-compliant.
Categories: , Tags: , , , , ,

Part number:

Product Part no.: Available memory area Communication interface Mechanical design Shaft length Pulses per revolution Sine/cosine periods per revolution Programmable/configurable Model Number of the absolute ascertainable revolutions Connection Number of pins Type of motor Enclosure rating
SEL34-HFB0K02 1053403 1792 Byte E2PROM 2048 HIPERFACE® tapered shaft – 16 16 No Absolute Multiturn 4096 male connector 8-pin Servomotor IP20
SEK34-HFB0K02 1053402 1792 Byte E2PROM 2048 HIPERFACE® tapered shaft – 16 16 No Absolute Singleturn 1 male connector 8-pin Servomotor IP20
SEL37-HFA0-K02 1037377 1792 Byte E2PROM 2048 HIPERFACE® tapered shaft 5mm 16 16 Yes Absolute Singleturn 4096 male connector 8-pin Servomotor IP40
SEK37-HFB0-K02 1037378 1792 Byte E2PROM 2048 HIPERFACE® tapered shaft 5mm 16 16 Yes Absolute Singleturn 1 male connector 8-pin Servomotor IP20
SEK37-HFA0-K02 1037376 1792 Byte E2PROM 2048 HIPERFACE® tapered shaft 5mm 16 16 Yes Absolute Singleturn 1 male connector 8-pin Servomotor IP40
SEL37-HFB0-K02 1037379 1792 Byte E2PROM 2048 HIPERFACE® tapered shaft 5mm 16 16 Yes Absolute Multiturn 4096 male connector 8-pin Servomotor IP20

At a glance:

  • Its small dimensions allow manufacturers of small and very small motors to achieve a significant reduction in the length of their motors.
  • The SEK/SEL37 motor feedback systems are particularly suitable for use under harsh ambient conditions.
  • The capacitive measurement principle with holistic sensing enables high axial and radial tolerances.
  • Due to the uniform mechanical component, a high level of flexibility can be achieved with SKS/SKM36 when using with various encoder systems.

Features:

  • Motor feedback system for the basic power range.
  • Special design for motors with a 40 mm edge dimension.
  • 16 sine/cosine periods per revolution.
  • Absolute position with a resolution of 512 increments per revolution and 4096 revolutions with the multiturn system.
  • Programming of the position value.
  • Electronic type label.
  • HIPERFACE® interface.
  • RoHS-compliant.

Related products

Sick

Cylinder sensors MZCG VIA

Chi tiết sản phẩm[block id="chevron-right"]

  • Extremely small housing saves installation space, thereby increasing efficiency of the system
  • Reduced storage costs, flexible machine design and easier service
  • Yellow LED as optical adjustment indicator and output state display
  • Green LED acts as a status indicator
  • IO-Link and automation functions

Sick

Fiber-optic sensors and fibers WLL24

Chi tiết sản phẩm[block id="chevron-right"]

  • Powerful 2G fiber-optic sensor for explosive environments
  • Special electronics are used to efficiently achieve long sensing distances and ranges in conjunction with fiber-optic cable systems
  • Output type: EN 60947-5-6 (NAMUR)
  • M12 plug or M16 screw connection: rotatable 90°
 

Sick

Automation light grids FLG

Chi tiết sản phẩm[block id="chevron-right"]

  • The FLG (frame light grid) switching automation light grid is the innovative solution in which the sender and receiver are combined in one housing for the detection of small parts.
  • In dynamic operating mode, the FLG performs reject and removal control of workpieces in pressing and punching machines and also supports the packaging process.
  • In static operating mode, it can be used for monitoring thread breakage.
  • With a monitored area of 200 mm x 250 mm or 200 mm x 120 mm, it allows detection of small parts down to minimum dimensions of 2 mm over a large area.

Sick

Condition Monitoring sensors Multi Physics Box

Chi tiết sản phẩm[block id="chevron-right"]

  • Condition Monitoring sensors for vibration, shock, and temperature monitoring
  • The Multi Physics Box Condition Monitoring sensor allows for continuous condition-based monitoring of, for example, motors, pumps, conveyor systems or fans. It measures vibrations, shocks, and temperature, thereby providing indications of potential faults and machine failures. If the measured values exceed the individually configurable thresholds, an alert is output. For vibration values, the vibration monitoring thresholds for machines according to ISO 10816-3 can be implemented via a multi-stage alert.
  • The sensor can be integrated into the machine or system via IO-Link or a simple alarm-based switching signal.
  • Whether on-site or in conjunction with a Cloud Service: The Multi Physics Box creates a data foundation that can be used to avoid unplanned downtime and effectively lower costs.

Sick

Contrast sensors KTL180

Chi tiết sản phẩm[block id="chevron-right"]

  • Safe object detection at high machine speeds
  • The KTL180 reliably detects contrast differences even at high machine speeds.
  • Thanks to its 31.2 kHz switching frequency, a high grayscale resolution and manual switching threshold adjustment, the KTL180 makes for safe object detection.
  • The response time of 16 µs ensures stable and accurate detection of contrast differences, for example with print marks, even for high-gloss materials. The sensor can be quickly adjusted to the respective application with the 7-segment display and easy menu guidance.
  • Various teach-in processes as well as an integrated job save increase the flexibility during commissioning in a large range of applications with very high process stability.