1. Sick »
  2. Registration sensors »
  3. Magnetic sensors »
  4. Magnetic sensors MLS »

Magnetic sensors MLS

  • Rugged aluminum housing
  • Easy installation: Thin housing design and different measurement area variants
  • IP65, IP67, IP68
  • Variants with measuring ranges of 100 mm to 1,000 mm
  • Integrated inertial measuring unit
Categories: , , Tags: , , , , ,

Part number:

Product Part no.: Connection type Length of cable Enclosure rating Communication interface Detection range typ.
MLSE-0200C2NUA 1113030 Cable, 4-wire 3 m IP65, IP67, IP68 Modbus 200 mm
MLSE-0300A2TP0 1092497 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 300 mm
MLSE-0200A2NQ0 1104468 Cable with M12 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 200 mm
MLSE-0500A2NP0 1090690 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 500 mm
MLSE-0400A2NP0 1090689 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 400 mm
MLSE-0500A2TP0 1092499 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 500 mm
MLSE-0600A2TP0 1092500 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 600 mm
MLSE-0200A2TP0 1092496 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 200 mm
MLSE-0400C2NUA 1128847 Cable, 4-wire 3 m IP65, IP67, IP68 Modbus 400 mm
MLSE-0300A2NP0 1090688 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 300 mm
MLSE-0200A2NP0 1090687 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 200 mm
MLSE-0600C2NP0 1138631 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 Modbus 600 mm
MLSE-0600A2NP0 1090691 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 600 mm
MLSE-0400A2TP0 1092498 Cable with M8 male connector, 4-pin 0.3 m IP65, IP67, IP68 CANopen 400 mm

At a glance:

  • Rugged aluminum housing
  • Easy installation: Thin housing design and different measurement area variants
  • Quick commissioning without configuration. Optional configuration and visualization via a user interface.
  • Large ground clearance: 10 mm to 70 mm of distance to the magnetic band can be installed
  • Safe lane detection and differentiation of up to 3 lanes for intersections and lane junctions
  • Monitoring of magnetic strength of the guidance lane
  • Easy and reliable detection of command marks (STOP, MERGE, SPEED CHANGE)
  • Support of vehicle navigation due to integrated inertial measuring unit

Features: 

  • Detection of magnetic lines for line guidance
  • Detection of switches: Up to 3 lanes at a time
  • Resolution 1 mm, repeatability 1 mm
  • CANopen, Modbus RTU RS-485
  • Detection of control marks
  • IP65, IP67, IP68
  • Variants with measuring ranges of 100 mm to 1,000 mm
  • Integrated inertial measuring unit

Related products

Sick

Cylinder sensors MPS-M

Chi tiết sản phẩm[block id="chevron-right"]

  • Quickly and easily mounted on the side or from above in T-slots without dismantling the cylinder end caps
  • Simple commissioning without time-consuming parameterization
  • Repeatability: 0.05 mm
  • Analog interface: 0 V to 10 V
  • Housing length: 32.5 mm

Sick

Cylinder sensors MZC2

Chi tiết sản phẩm[block id="chevron-right"]

  • Short switching point optimized for gripper applications increases process efficiency due to higher PSDI times
  • Short housing (19.5 mm) for use in pneumatic grippers and miniature cylinders
  • LED for indicating the output state
  • IP67 enclosure rating
  • Sensor is fully recessed in the slot

Sick

Fiber-optic sensors and fibers WLL80

Chi tiết sản phẩm[block id="chevron-right"]

  • The smart solution for challenging detection tasks
  • With the WLL80 opto-electronic fiber optic amplifier, SICK is creating a new generation of amplifiers for the flexible integration of fiber optics in confined spaces.
  • The intelligent WLL80 features IO-Link and can make processes even more efficient with various Smart Tasks. Thanks to IP54, it is protected from dust and spray water during operation. Continuous threshold adaptation ensures good performance in the long term with minimal maintenance requirements.
  • In addition to a fast response time and high detection range, it is characterized by flexible and user-friendly parameterization via the OLED display or IO-Link. Whether as a single or bus version, the WLL80 is suitable for a wide range of applications thanks to its extensive fiber optics portfolio.

Sick

FORK sensor WFM

Chi tiết sản phẩm[block id="chevron-right"]

  • Plug-and-play fork sensors – connect and get started.
  • The WFM fork sensors are extremely quick and easy to mount and commission thanks to plug and play.
  • Their yellow receive indicator can be seen all the way round, providing optimum feedback on the switching behavior of the WFM. Since the sender and receiver are integrated within the same housing, there is no need for any complex alignment work, allowing detection tasks to be prepared and completed quickly and easily.
  • WFM have a rugged aluminum housing and are available in five different designs with fork widths ranging from 30 mm to 180 mm and fork depths of between 40 mm and 120 mm.
  • SICK's fork sensors are suited to numerous applications, such as detecting parts in production processes, checking whether various objects are present, or intralogistic processes.

Sick

Color sensors CSS/CSX High Speed

Chi tiết sản phẩm[block id="chevron-right"]

  • The CSS/CSX High Speed color sensor is characterized by its high switching frequency and its precise, infinitely variable sensitivity adjustment
  • The sensor can be quickly and precisely configured for the specific application using the setup assistant in the SOPAS software.
  • Up to 24 colors per identification task (job) can be saved
  • IO-Link interfaces; SOPAS software with application-specific setup assistant