Linear encoders
- High travel speed linked to precise positioning increases system efficiency and improves throughput
- Camera-based system with no moving parts increases the sensor's service life, thus reducing lifecycle costs considerably
- Traversing speeds of up to 7 m/s can be achieved
- Output of position and speed data, as well as pre-failure notifications via fieldbus interfaces
- Wide operating temperature range from –30 °C to +60 °C
Linear encoders
- Measurement lengths of up to 4 m
- Maintenance and wear-free thanks to non-contact measurement principle
- No need for a reference run due to the absolute position recording
- For high traversing speeds of up to 10 m/s
- Reliable measurements, even in the event of contamination and condensation on the magnetic tape
Linear encoders
- 100% mechanical and electrically compatible with existing cylinder constructions.
- Save-spacing installation: Better utilization of the piston stroke in tight installation space of the cylinder
- Favorable cost-benefit ratio.
- Fluid temperature (hydraulic oil) up to max. +95 °C.
- Compact dimensions: 10 mm installation space, 30 mm cushion zone.
Linear encoders
- Low maintenance costs due to wear- and maintenance-free measurement principle.
- Absolute measurement without reference run.
- Intelligent condition monitoring enables predictive maintenance of machines.
- Resolution: up to 10 μm.
- Measuring lengths: 50 mm to 2,500 mm.
- Reduction of installation time thanks to the easy-to-mount clamping ring and the stator couplings.
- Compact, space-saving design facilitates installation in tight installation spaces.
- Pulse per revolution: Up to 8,192.
- Housing diameter: 81 mm, diameter of through hollow shaft: 30 mm or 42 mm.
- Enclosure rating: IP65
- Fully scalable for binary, non-binary, and non-integer resolutions thanks to round axis functionality.
- Compact and cost-efficient design.
- High-resolution absolute encoder with up to 30 bits (AFM60) or 18 bits (AFS60).
- Connection type: 3 x M12 axial plug.
- Status display via 5 LEDs.
Incremental encoders
- Universal power supply and a rotatable connector reduce the number of variants required and provide increased installation flexibility
- Anti-dither functionality maintains a high level of productivity also in high vibration applications
- Pulses per revolution: Up to 2,400
- Communication interfaces: TTL/HTL
- Connection types: M12 male connector or cable
- Freely programmable resolution (up to 15 bits)
- Easy zero adjustment directly on the encoder by pressing a button or via sub cable (cable version)
- Zero-set function
- Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
- Enclosure rating: Up to IP66
- The ACS36 (singleturn) and ACM36 (multiturn) encoder families have an analog interface with a maximum resolution of up to 3723 steps (for singleturn and multiturn).
- The analog interfaces (current/voltage) offer a low-cost solution for detecting the position and path, and thereby help to reduce overall system costs.
- IP65 protection class
- Operating temperature: –30 °C to +80 °C
- The ACM60 (multiturn) encoder family has an analog interface with a maximum overall resolution of up to 13107 steps.
- A current signal of 4-20 mA or a voltage signal of 0-10 V is output depending on the device version.
- Programming via keypad on the encoder
- IP68 protection class
- Operating temperature: –30 °C to +80 °C
Wire encoders
- Measuring range: 0 m ... 10 m
- Resolution: 0.001 mm ... 0.14 mm
- Communication interface: IO-Link / IO-Link V1.1 / COM3 (230,4 kBaud)/ CANopen/ SSI/ PROFINET/ EtherCAT®/ EtherNet/IP™/ DeviceNet™/ PROFIBUS DP/ 4...20 mA/ 0...10 V/ Incremental / TTL / RS-422/ Incremental (HTL / Push pull)/ Incremental (TTL / HTL)
- Very small, slim housing (55 mm ... 190 mm) with spring integrated in the measurement drum
Incremental encoders
- Pulses per revolution: 0 … 1024
- Mechanical design: Solid shaft, face mount flange
- Shaft diameter: 6 mm
- Communication interfaces: TTL / RS-422, HTL / Push pull, and Open Collector
