Transmittance dust Measuring Devices
- The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light
- Combination of transmittance and scattered light measurement
- For very low to high dust concentrations
- For medium to large duct diameters
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurement of dust concentration in exhaust gas and exhaust air ducts upstream and downstream of filters
Scattered light dust Measuring Devices
- The DUSTHUNTER SB30 is a measuring device, designed to detect very low to moderate dust concentrations, such as in hot or volatile gases
- Automatic check of zero and reference point
- Emissions monitoring in industrial plants including, for example, power plants, heating systems, waste incineration plants, in steel production, and in cement plants
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurements in flue gas ducts upstream and downstream of dust filters
Scattered light dust Measuring Devices
- The DUSTHUNTER SB50 is a measuring device for dust at low to medium concentrations in challenging applications, e. g., in hot or corrosive gases
- For low to medium dust concentrations
- Emission monitoring of heating installations
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurement in cement plants
Scattered light dust Measuring Devices
- Measurement independent of gas velocity, humidity and particle charge
- Approved according to EN 15267
- For medium to large duct diameters
- Emission monitoring of power stations and waste incineration plants
- Monitoring of dust concentrations downstream of filter plants
- Monitoring of dust loads in factory workshops
- Control of fresh air supplies and exhaust air plants
Scattered light dust Measuring Devices
- The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content
- Emission monitoring which does not require permission in industrial systems
- Dust concentration measurements in exhaust gas ducts
- Monitoring of cloth filters for defective filter bags
- Ideal for monitoring electrostatic precipitators
- Dust monitoring in grinding and dosing systems
- Monitoring and regulation of fresh air and exhaust air systems
Scattered light dust Measuring Devices
- The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations
- For very low to medium dust concentrations
- For small to medium duct diameters
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurements in exhaust gas or exhaust ventilation ducts
Scattered light dust Measuring Devices
- The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas
- For very low to medium dust concentrations
- Gas sampling and return combined in one probe
- Contamination check
- Monitoring of wet gas scrubbing facilities
- Measurement in saturated gas downstream of desulfurization plants
- Determination of dust concentrations in wet exhaust air and in technological processes
Ultrasonic
- Gas flow measuring instruments FLOWSIC100
- Integrated measurement via duct diameter for types H, M, and S
- Probe version PR for cost-saving, single-sided installation in duct
- No purge air required for applications with gas temperatures up to 260 °C
- Continuous emission measurement during power generation
- Emission monitoring in waste incineration plants
- Emission measurement in the processing industry (cement, iron and steel, glass)
- Emission monitoring in the chemical and hydrocarbon processing (HPI) industry
- Emission monitoring in the paper and textiles industry
- Flow measurements and process control in e. g., heating and ventilation systems
- The FLOWSIC100 Flare product family is designed for flare gas and steam flow measurements
- Innovative sensor design for very high gas velocities and gas temperatures up to 280 °C
- Control cycle for automatic self-diagnosis / signal optimization
- Emissions control for accounting of CO2 emissions
- Detection of flare gas leaks
- Measurement of steam flow
- Monitoring of steam injection when burning flare gas
- Monitoring of gas losses
- Exact mass balance and process optimization
Pitot tube
- A Pitot tube flow velocity measuring device
- The SMC222 series Pitot tube flow velocity measuring device is suitable for measuring the flow of steam, air, and other such mediums
- Provides users with a standard 4 ... 20 mA output proportional to the flow rate
- Online measurement of industrial boiler fuel gas emissions
- Managing flow rate of mediums such as steam or air, especially useful for measuring flow rate in large-diameter ducts
In-situ gas analyzers
- In-situ gas analyzers GM32
- The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3
- No gas sampling, no gas transport, no gas conditioning
- Up to eight measuring components at the same time, plus process temperature and pressure
- DOAS and CDE evaluation process
- Numerous independent measuring ranges with consistent accuracy
- Automatic self-test function (QAL3) without test gases
- Overpressure encapsulated design for ATEX Zones 1 and 2
- For monitoring and control in flue gas purification,such as denitrification plants, desulfurization plants and converters
- Emissions monitoring according to EU directives or local regulations
- TRS emissions monitoring in the Kraft pulp industry.
In-situ gas analyzers
- In-situ gas analyzers GM35
- Simultaneous or as individual measurement: the GM35 gas analyzer measures CO2, H2O and CO, or N2O, as well temperature and pressure
- No gas sampling and conditioning
- Gas testable version of measuring probe available
- Emission monitoring according to EN 14181, e. g., in power or cement plants
- Monitoring of the combustion efficiency in hazardous waste incineration
- Process monitoring in urea production
