Hot-wet Extractive gas analyzers
- CEMS solutions MCS100E HW
- Measured values: CH4, CO, CO2, H2O, HCl, N2O, NH3, NO, NO2, O2, SO2
- The MCS100E HW is an analyzer system for the extractive measurement of up to 8 IR active gas components.
- Emission monitoring in waste incineration plants
- Monitoring of incinerators with secondary fuels
- Flue gas monitoring in cement plants
- Emission monitoring in refineries
- Emission monitoring of land-based, heavy fuel fired diesel engine power plants
Hot-wet Extractive gas analyzers
- CEMS solutions MCS200HW
- The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
- Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
- Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
- Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
- SO3 monitoring in coal-fired power plants
C-slot cylinders
- Cylinder types with adapter: Round body cylinder/ Profile cylinders and tie-rod cylinders/ SMC rail CDQ2/ SMC rail ECDQ2
- Measuring range: 25 mm ... 200 mm
- Housing length: 41 mm ... 215 mm
- Supply voltage: 12 V DC ... 30 V DC
- Analog outputs (for current or voltage), switching output, and IO-Link
Inductive sensor
- Thread size: M8 x 1/ M12 x 1/ M18 x 1/ M30 x 1.5
- Sensing range: Sn 1 mm ... 38 mm
- Highly cost-efficient thanks to low purchase costs
- Wide selection available thanks to extensive standard portfolio
- High positioning accuracy thanks to precise switching behavior
Inductive sensor
- Thread size: M4 x 0.5/ M5 x 0.5
- Sensing range: 0.6 mm ... 4 mm
- Electrical configuration: DC 3-wire
- High positioning accuracy and precise switching behavior
- The low weight of the sensor enables fast acceleration in dynamic handling processes
- Simple sensor diagnostics, device change, and identification through IO-Link
Inductive sensor
- Reliable processes thanks to extended, highly accurate sensing ranges enabled through the use of SICK ASIC
- Thread size: M8 x 1/ M12 x 1/ M18 x 1/ M30 x 1.5
- Sensing range: 2 mm ... 20 mm
- Electrical configuration: DC 3-/4-wire
- High degree of flexibility and communication options thanks to IO-Link
Inductive sensor
- Reduced machine downtimes thanks to longer sensor service life, even in harsh working conditions
- Thread size: M8 x 1/ M12 x 1/ M18 x 1/ M30 x 1.5
- Sensing range: 1.5 mm ... 20 mm
- Electrical configuration: DC 3-/4-wire, DC 2-wire
- High degree of flexibility and communication options thanks to IO-Link
- Easy to implement customer-specific variants within the standard product portfolio
Inductive sensor
- Analog sensors with triple sensing range for use in industrial environments
- Thread size: M8 x 1/ M12 x 1/ M18 x 1/ M30 x 1.5
- Sensing range: 2 mm ... 40 mm
- Analog output signal: 0 V ... 10 V and 4 mA ... 20 m
- Less space required for the same sensing range when compared with standard sensors
- Less storage due to reduced multiplicity of types on account of integrated current and voltage interface
Inductive sensor
- Rectangular miniature sensors for use in industrial environments
- Extended sensing ranges: 1.5 mm to 3 mm
- Electrical configuration: DC 3-wire
- Reliable detection of fast handling and mounting processes
- High positioning accuracy and precise switching behavior
- Low weight enables fast acceleration in dynamic handling processes
Inductive sensor
- Easy to mount in only two seconds without the need for additional tools
- Extended sensing ranges: 20 mm to 40 mm
- Electrical configuration: DC 2-/3-/4-wire
- The four corner LEDs ensure that the sensor status can be identified from any viewing direction, whatever the mounting position
- Long sensor service life, even in harsh environments that are subjected to severe weather conditions
- Stable processes thanks to extensive sensing ranges
Inductive sensor
- Large rectangular housings for use in industrial environments
- Longer sensing ranges: 50 mm to 60 mm
- Electrical configuration: DC 3-/4-wire, or AC/DC 2-wire
- Reduced mechanical damage
- Longer service life for reduced costs
Inductive sensor
- Sensor principle: Inductive
- Response range up to 15 mm
- Fast diagnostics via LED status indicator
- Cascadability of up to 9 sensors saves costs
- Just one safety switch in conjunction with a suitable safety module makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849)
