- Easy to clean anodized surfaces
- Scrapers and lubricants (NSF-H1) are approved for food applications
- Hygienic protective caps for unused mounting holes
- Available in eight sizes covering piston diameters from 25 mm to 125 mm
- Selection from elastic or pneumatic cushioning possible
- Option to configure the air connections for supply and exhaust on rear cover, which increases flexibility when designing the system’s tubing concept
Series CCL-IS Standard Cylinders (ISO 15552) AVENTICS™
- The AVENTICS Series CCL-IS (ISO 15552) cylinder in clean design is produced specifically for packaging applications in the food industry.
- Easy to clean anodized surfaces
- Scrapers and lubricants (NSF-H1) are approved for food applications
- Hygienic protective caps for unused mounting holes
At a glance:
- The AVENTICS Series CCL-IS (ISO 15552) cylinder in clean design is produced specifically for packaging applications in the food industry.
- It is characterized by practical sensor mountings and its clean design combines efficient, simple cleaning with low maintenance cycles.
Features:
- Easy to clean anodized surfaces
- Scrapers and lubricants (NSF-H1) are approved for food applications
- Hygienic protective caps for unused mounting holes
- Available in eight sizes covering piston diameters from 25 mm to 125 mm
- Selection from elastic or pneumatic cushioning possible
- Option to configure the air connections for supply and exhaust on rear cover, which increases flexibility when designing the system’s tubing concept
You can download more at the document here: Download
Related products
- The AVENTICS Series 652 is an easy-to-install line of pneumatic filters, regulators and lubricators (FRLs) that offer the industry´s highest flow rates and widest temperature ratings.
- Extended high- and low-temperature capabilities (-40° C to 80° C) allow the FRLs to be specified across a broad range of applications, including those within harsh environments.
- Pipe / Port Size: 1/4 ; 1/2 ; 3/8
- Operating Environment: Indoor, Outdoor
- The AVENTICS S Series is a stainless-steel NFPA Interchangeable pneumatic cylinder line designed to perform in the toughest wash down applications.
- Bore: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8"
- Operating Environment: Corrosive; Indoor; Washdown
- Standard rod wiper construction is highly durable polyurethane
- The AVENTICS Series CCI (ISO 21287) cylinders stand for innovative, compact construction and an easy to clean design.
- Easy to clean design preventing the accumulation of dirt
- Low length tolerance - up to 60% shorter than standard ISO profile cylinders, which makes the Series CCI (ISO 21287) ideally suited for compact machine designs
CYLINDERS
- The AVENTICS Series ACCU is an economical pneumatic linear actuator line that contains an internal linear resistive transducer.
- Continuous position monitoring through internal linear resistive transducer (LRT)
- Bore: 1 1/2", 1-1/16", 2", 2 1/2", 3 1/4", 4", 5", 6", 8"
- Operating Environment: Corrosive, Hazardous, Indoor, Outdoor, Washdown
CYLINDERS
- The ASCO Numatics Series 441 is a line of robust, compact short-stroke pneumatic cylinders.
- FunctionThrough Rod, Single Acting, Non Rotation, Double Acting, Single Rod
- Standards / Regulations: ATEX Zone 1-21, ATEX Zone 2-22
- Handles lubricated and unlubricated air
