Gas flow measuring instruments FLOWSIC100

FLOWSIC100 system

• Measured values: Volumetric flow a. c., volumetric flow s. c., gas velocity, sound velocity, gas temperature
• Performance-tested measurands: Gas velocity
• Measurement principle: Ultrasonic transit time difference measurement
• Measuring ranges:

Gas velocity: 0 … ± 40 m/s

Certified measuring ranges: Gas velocity 0 … 20 m/s / 0 … 40 m/s

• Repeatability: For v < 2 m/s: ± 0.02 m/s, For v > 2 m/s: ± 1 %
• Accuracy: ± 0.1 m/s (Depending on application)
• Diagnostics functions: Automatic check cycle for zero and span point/ Extended device diagnosis via SOPAS ET software
• Ambient temperature: –40 °C … +60 °C
• Storage temperature: –40 °C … +70 °C
• Conformities:

2001/80/EC (13. BImSchV)

2000/76/EC (17. BImSchV)

27. BImSchV

30. BImSchV

TA-Luft (Prevention of Air Pollution)

EN 15267

EN 14181

EN 1611-2

MCERTS

GOST

• Electrical safety: CE

FLOWSIC100 M

• Gas temperature: –40 °C … +260 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 0.15 m … 3.4 m
• Dust load: ≤ 1 g/m³ (Depending on measuring path and gas temperature)
• Enclosure rating: IP65 MCU
• Mounting: Installation angle 45° … 60°
• Electrical connection:  Power consumption ≤ 40 W
• System components:

2 x FLSE100-M sender/receiver unit

1 x MCU-N control unit

1 x connection unit

2 x Connection cable

2 x flange with tube

FLOWSIC100 H

• Gas temperature: –40 °C … +260 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 1.4 m … 13 m
• Dust load: ≤ 100 g/m³ (Depending on measuring path and gas temperature; for dry, non-sticky dust)
• Enclosure rating: IP65 MCU
• Mounting: Installation angle 45° … 60°
• Electrical connection: Power consumption ≤ 40 W
• System components:

2 x FLSE100-H sender/receiver unit

1 x MCU-N control unit

1 x connection unit

2 x Connection cable

2 x flange with tube

FLOWSIC100 PR

• Gas temperature: –40 °C … +260 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: ≥ 0.4 m
• Dust load: ≤ 1 g/m³ (Depending on measuring path and gas temperature)
• Enclosure rating: IP65 MCU
• Mounting: Installation angle 45°
• Electrical connection: Power consumption ≤ 40 W
• System components:

1 x FLSE100-PR sender/receiver unit

1 x MCU-N control unit

1 x Connection cable

1 x flange with tube

FLOWSIC100 S

• Gas temperature: –40 °C … +150 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 0.15 m … 1.7 m
• Dust load: ≤ 1 g/m³ (Depending on measuring path and gas temperature)
• Enclosure rating: IP65 MCU
• Mounting: Installation angle 45° … 60°
• Electrical connection: Power consumption ≤ 40 W
• System components:

2 x FLSE100-S sender/receiver unit

1 x MCU-N control unit

2 x Connection cable

2 x flange with tube

FLOWSIC100 M-AC

• Gas temperature: –40 °C … +450 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 0.15 m … 3.4 m
• Dust load: ≤ 1 g/m³ (Depending on measuring path and gas temperature)
• Mounting: Installation angle 45° … 60°
• Electrical connection: Power consumption ≤ 75 W
• System components:

2 x FLSE100-MAC sender/receiver unit

1 x MCU-P control unit

1 x connection unit

2 x Connection cable

2 x purge air hose

2 x flange with tube

FLOWSIC100 H-AC

• Gas temperature: –40 °C … +450 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 1.4 m … 11.3 m
• Dust load: ≤ 100 g/m³ (Depending on measuring path and gas temperature; for dry, non-sticky dust)
• Mounting: Installation angle 45° … 60°
• Electrical connection: Power consumption ≤ 75 W
• System components:

2 x FLSE100-HAC sender/receiver unit

1 x MCU-P control unit

1 x connection unit

2 x Connection cable

2 x purge air hose

2 x flange with tube

FLOWSIC100 PM

• Gas temperature: –40 °C … +450 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 0.35 m … 2.5 m
• Dust load: ≤ 1 g/m³ (Depending on measuring path and gas temperature)
• Enclosure rating: IP65 MCU
• Mounting: Installation angle 45° … 60°
• Electrical connection: Power consumption ≤ 40 W
• System components:

2 x FLSE100-PM sender/receiver unit

1 x MCU-N control unit

1 x connection unit

2 x Connection cable

2 x flange with tube

2 x purge air hose

1 x purge air unit

FLOWSIC100 PH

• Gas temperature: –40 °C … +450 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 0.7 m … 8.7 m
• Dust load: ≤ 100 g/m³ (Depending on measuring path and gas temperature)
• Enclosure rating: IP65 MCU
• Mounting: Installation angle 45° … 60°
• Electrical connection: Power consumption ≤ 40 W
• System components:

2 x FLSE100-PH sender/receiver unit

1 x MCU-N control unit

1 x connection unit

2 x Connection cable

2 x flange with tube

2 x purge air hose

1 x purge air unit

FLOWSIC100 PH-S

• Gas temperature: –40 °C … +450 °C
• Operating pressure: –100 hPa … 100 hPa
• Nominal pipe size: 1.4 m … 11.3 m
• Dust load: ≤ 100 g/m³ (Depending on measuring path and gas temperature)
• Enclosure rating: IP65 MCU
• Mounting: Installation angle 45° … 60°
• Electrical connection: Power consumption ≤ 40 W
• System components:

2 x FLSE100-PHS sender/receiver unit

1 x MCU-N control unit

1 x connection unit

2 x Connection cable

2 x flange with tube

2 x purge air hose

1 x purge air unit

MCU-N control unit

• Description: Compulsory control and evaluation unit for volume flow measuring devices without internal cooling
• Ambient temperature: –40 °C … +60 °C
• Enclosure rating: IP65
• Analog outputs: 1 output 0/2/4 … 20 mA, + 750 Ω, Electrically isolated, up to five outputs when add-on modules are used (option)
• Analog inputs: 2 inputs 0 … 20 mA, Up to four outputs when using additional modules (option)
• Digital outputs : 5 relay outputs (change-over contacts), potential-free, + 48 V, 1 A, Safety extra-low voltage; for status signals “operation/malfunction”, “limit value”, “warning”, “maintenance” and “check cycle”
• Digital inputs: 4 potential-free contacts
• USB:✔, Connection to SOPAS ET software
• Serial:✔, RS-232/ RS-485, Connection to SOPAS ET software, Internal system bus
• Ethernet:✔,Via optional interface module
• Modbus:✔, ASCII RS-485 (via optional interface module), RTU RS-485 (via optional interface module), TCP (via optional interface module)
• PROFIBUS DP:✔,Via optional interface module
• Indication: LC display (option)
• Status LEDs: “Power,” “Failure,” and “Maintenance request”
• Operation: Via LC-display (option) or software SOPAS ET
• Dimensions (W x H x D): 210 mm x 340 mm x 120 mm
• Weight: ≤ 3.7 kg
• Electrical connection:

Voltage: 90 … 250 V, Version with 24 V DC available as an option

Frequency: 47 … 63 Hz

Power consumption: ≤ 15 W

• Options: Interface module(s)/ I/O module(s)/ LC display/ 19″-type

MCU-P control unit

• Description: Compulsory control and evaluation unit with integrated cooling air unit, for volume flow measuring devices with internal cooling
• Ambient temperature: -40 °C … +45 °C, Intake temperatures for purge air
• Enclosure rating: IP54
• Analog outputs: 1 output 0/2/4 … 20 mA, + 750 Ω, Electrically isolated, up to five outputs when add-on modules are used (option)
• Analog inputs: 2 inputs 0 … 20 mA, Not electrically isolated; additional inputs if using I/O modules (option)
• Digital outputs : 5 relay outputs (change-over contacts), potential-free, + 48 V, 1 A, Safety extra-low voltage; for status signals “operation/malfunction”, “limit value”, “warning”, “maintenance” and “check cycle”
• Digital inputs: 4 potential-free contacts
• USB:✔, Connection to SOPAS ET software
• Serial:✔, RS-232/ RS-485, Connection to SOPAS ET software, Internal system bus
• Ethernet:✔, Via optional interface module
• Modbus:✔, ASCII RS-485 (via optional interface module), RTU RS-485 (via optional interface module), TCP (via optional interface module)
• PROFIBUS DP:✔ , Via optional interface module
• Indication: LC display (option)
• Status LEDs: “Power,” “Failure,” and “Maintenance request”
• Operation: Via LC-display (option) or software SOPAS ET
• Dimensions (W x H x D): 300 mm x 455 mm x 220 mm
• Weight: ≤ 13.5 kg
• Electrical connection:

Voltage: 90 … 250 V, Version with 24 V DC available as an option

Frequency: 47 … 63 Hz

Power consumption: ≤ 70 W

• Auxiliary connections: Purge air
• Options: Interface module(s)/ I/O module(s)/ LC display/ 19″-type

SLV4-2 purge air unit, 2BH1300, 3-ph

• Description: Obligatory purge air unit for purged volume flow measuring devices
• Purge air quantity: ≥ 48 m³/h
• Diagnostics functions: Low pressure controller
• Ambient temperature: –20 °C … +40 °C
• Enclosure rating: IP54
• Dimensions (W x H x D): 550 mm x 550 mm x 258 mm (for details see dimensional drawings)
• Weight : 18 kg
• Auxiliary connections  Purge air: 40 mm
• Integrated components: 2-step air filter, type Europiclon, dust capacity 200 g