Switching automation light grids ELG
- Operating range: 1.5 m … 12 m
- Different beam resolutions 10 mm, 30 mm and 60 mm
- High immunity to ambient light when exposed to sunlight and reflective objects, eliminating false trips
- A high operating reserve increases application availability and reduces maintenance costs
- Optical synchronization enables quick installation and cost-effective connection
- The sensitivity adjustment enables trouble-free operation without reflection problems for the customer
At a glance:
- The sturdy light grid for many standard applications
- High immunity to ambient light when exposed to sunlight and reflective objects, eliminating false trips
- A high operating reserve increases application availability and reduces maintenance costs
- Optical synchronization enables quick installation and cost-effective connection
- The sensitivity adjustment enables trouble-free operation without reflection problems for the customer
Technical data:
- Operating range: 1.5 m … 12 m
- Length of cable: 5 m / 15 m
- Different beam resolutions 10 mm, 30 mm and 60 mm
- PNP/NPN, relay output and a test input
Features:
- Technology: Sender/receiver, Switching light grid
- Up to 128 beams
- Operating range: 1.5 m … 12 m
- Length of cable: 5 m / 15 m
- Different beam resolutions 10 mm, 30 mm and 60 mm
- Enclosure rating: IP65
- Potentiometer for sensitivity adjustment
- Ambient light immunity up to 150,000 lux
- Optical synchronization
Mechanics/ Electronics:
- Power supply: 15 V DC … 30 V DC
- Switching output: PNP/NPN, relay output and a test input
- Output mode: Q dark switching
- Connection type: Cable/ Male connector
- Housing material: Aluminum
- Temperature range: –35 °C to +55 °CDimensions:
Connection diagram:
You can download more at the document here: Download
Connection systems
- Connecting cables with female connector, M12, 4-pin
- Cable material: PVC
- Connector material: TPU
| Figure | Connection type head A | Connection type head B | Connecting cable | Locking nut material | Type |
Part no. |
 |
Female connector, M12, 4-pin, straight, unshielded |
Cable, open conductor heads |
2 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-G02M |
6009382 |
|
5 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-G05M |
6009866 |
|||
|
10 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-G10M |
6010543 |
|||
 |
Female connector, M12, 4-pin, angled, unshielded |
Cable, open conductor heads |
2 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-W02M |
6009383 |
|
5 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-W05M |
6009867 |
|||
|
10 m, 4-wire |
CuZn, nickel-plated brass | DOL-1204-W10M |
6010541 |
Related products
Signal isolation
- The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.
- Input signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
- Output signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
- The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary
Scattered light dust Measuring Devices
- The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas
- For very low to medium dust concentrations
- Gas sampling and return combined in one probe
- Contamination check
- Monitoring of wet gas scrubbing facilities
- Measurement in saturated gas downstream of desulfurization plants
- Determination of dust concentrations in wet exhaust air and in technological processes
Scattered light dust Measuring Devices
- The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content
- Emission monitoring which does not require permission in industrial systems
- Dust concentration measurements in exhaust gas ducts
- Monitoring of cloth filters for defective filter bags
- Ideal for monitoring electrostatic precipitators
- Dust monitoring in grinding and dosing systems
- Monitoring and regulation of fresh air and exhaust air systems
Transmittance dust Measuring Devices
- The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light
- Combination of transmittance and scattered light measurement
- For very low to high dust concentrations
- For medium to large duct diameters
- Emissions monitoring at power plants and waste incineration plants
- Monitoring of filter systems
- Measurement of dust concentration in exhaust gas and exhaust air ducts upstream and downstream of filters
Scattered light dust Measuring Devices
- The DUSTHUNTER SB50 is a measuring device for dust at low to medium concentrations in challenging applications, e. g., in hot or corrosive gases
- For low to medium dust concentrations
- Emission monitoring of heating installations
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurement in cement plants
