- Valve Actuation: Solenoid
- Body Material: Aluminum
- Media: Natural Gas
- Pipe / Port Size: 1/2 “; 3/8 “; 3/4 “; 1 “; 1 1/4 “; 1 1/2 “; 2 “; 2 1/2 “; 3 “
- Port Type: NPTF
- Function: 2 way – 2/2 Normally Open
- Voltage: 24 AC, 120 AC, 230 AC
- Max Differential / Max Operating Pressure: Vacuum to 150 PSIG
- Operating Environment: Indoor
- Standards / Regulations: CSA, UL, FM
ASCO™ Series S261 Gas Shut Off Valve
- Valve Actuation: Solenoid
- Body Material: Aluminum
- Media: Natural Gas
- The ASCO Series S261 is a line of solenoid valves designed for on-off control of fuel gas in commercial and industrial gas burners.
- Suitable for ambient temperatures up to 175°F
Category: Fuel, Gas & Oil Valves
Tag: test
At a glance:
- The ASCO Series S261 is a line of solenoid valves designed for on-off control of fuel gas in commercial and industrial gas burners.
- The pilot-operated valves have die-cast aluminum bodies, are designed for 2-way, normally closed operation, and have high-pressure capabilities.
Features:
- Provided with 1/8-inch NPT upstream and downstream pipe taps with plugs for routine testing
- Zero differential piloted diaphragm
- Suitable for ambient temperatures up to 175°F
- Opening and closing times are less than 1 second
- Available in 3/8-inch to 3-inch sizes for a wide variety of applications
- All models are UL/CSA-rated; FM rating on 3/8-inch to 3/4-inch sizes
You can download more at the document here: Download
Related products
Scattered light dust Measuring Devices
- Measurement independent of gas velocity, humidity and particle charge
- Approved according to EN 15267
- For medium to large duct diameters
- Emission monitoring of power stations and waste incineration plants
- Monitoring of dust concentrations downstream of filter plants
- Monitoring of dust loads in factory workshops
- Control of fresh air supplies and exhaust air plants
Scattered light dust Measuring Devices
- The DUSTHUNTER SB50 is a measuring device for dust at low to medium concentrations in challenging applications, e. g., in hot or corrosive gases
- For low to medium dust concentrations
- Emission monitoring of heating installations
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurement in cement plants
ELEMENT
- The structure of ELEMET elevator belts is a steel carcass composed by a strong warp of steel cord with suitable elastic modulus such to reach the best compromise between low elongation and good flexibility.
- Rubber covers for elevator belts have two main functions: protection of the carcass against material and moisture aggression, assurance of the perfect bucket holding up without bolt loosening in course of time.
- Superior temperature resistance
Exhaust Gas Analyser
- Compact workshop instrument for performing the AU on diesel vehicles
- with speed sensing for conventional vehicles
- with the Bluetooth OBD module for modern OBD vehicles
- Future proof for Euro 6 vehicles
- Opacilyt 1030 and OBD interface of the vehicle are connected to the PC / laptop
- AU software with integrated AU target database also available for commercial vehicles
ELETEX
Belts designed to be used in bucket elevator plant only. The special construction of the reinforced polyester-nylon fabrics assures the use of such belts also for severe loading requirements. The result are the following:
- Polyester warp assures high resistance to heavy working conditions.
- Nylon weft guarantees transverse tearing strength and strong bolt holding.