Motor feedback SRS50-HFA0-K21

Sine/cosine periods per revolution: 1,024
Total number of steps: 32,768
Measuring step: 0.3 ″ For interpolation of the sine/cosine signals with, e. g., 12 bits
Available memory area: 128 Byte
Type of code for the absolute value: Binary
Code sequence: Increasing, when turning the shaft For clockwise rotation, looking in direction “A” (see dimensional drawing), For clockwise shaft rotation, looking in direction “A” (see dimensional drawing
Communication interface: HIPERFACE®

At a glance:

Motor feedback systems for the top performance range
1,024 sine/ cosine periods per revolution
Absolute position with a resolution of 32,768 increments per revolution and 4,096 revolutions with the multiturn system
HIPERFACE® interface: Programming of the position value and electronic type label
Insert shaft or tapered shaft with various torque supports
Integrated version, mounted version or stand-alone design
Certified according to SIL2/PL d (only valid for SRS50S/SRM50S…)
Conforms to RoHs

Technical data:

Mechanical design: Tapered shaft
Shaft diameter: M4
Wavelength: 10 mm
Sine/cosine periods per revolution: 1024
Total number of steps: 32,768
Measuring step: 0.3 ″ For interpolation of the sine/cosine signals with, e. g., 12 bits
Available memory area: 128 Byte
Type of code for the absolute value: Binary
Communication Interface detail: HIPERFACE®
Enclosure rating: IP40
Operating temperature range: –30 °C … +115 °C

Dimensions:

Connection diagram:

Features:

Sine/cosine periods per revolution: 1,024
Number of the absolute ascertainable revolutions: 1
Total number of steps: 32,768
Measuring step: 0.3 ″ For interpolation of the sine/cosine signals with, e. g., 12 bits
Integral non-linearity: Typ. ± 45 ″, Error limits for evaluating sine/cosine period, without mechanical tension of the stator coupling
Differential non-linearity: ± 7 ″, Non-linearity within a sine/cosine period
Operating speed: ≤ 6,000 min⁻¹, up to which the absolute position can be reliably produced
Available memory area: 128 Byte
Type of code for the absolute value: Binary
Code sequence: Increasing, when turning the shaft For clockwise rotation, looking in direction “A” (see dimensional drawing), For clockwise shaft rotation, looking in direction “A” (see dimensional drawing
Communication interface: HIPERFACE®