At a glance:
- The DUSTHUNTER SB100 is a type-approved measuring device for dust at very low to medium concentrations in challenging applications, e. g., in hot or corrosive gases
- Easy installation, commissioning, and operation
- Measurement independent of gas velocity, humidity and particle charge
- Approved according to EN 15267
- Low maintenance due to self-monitoring
- For very low to medium dust concentrations
- One-sided installation
- Contamination check
- Automated thorough check of zero and reference point
- Automated compensation of background radiation, therefore no light absorber required
- For medium to large duct diameters
- Emission monitoring of power stations and waste incineration plants
- Monitoring of dust concentrations downstream of filter plants
- Monitoring of dust loads in factory workshops
- Control of fresh air supplies and exhaust air plants
Please note: The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications
Technical data:
DUSTHUNTER SB100 system
- Measured values: Scattered light intensity, dust concentration (after gravimetric comparison measurement)
- Performance-tested measurands: Scattered light intensity
- Measurement principles: Scattered light backward
- Spectral range : 640 nm … 660 nm, Laser, protection class 2, power < 1 mW
- Measuring ranges Dust concentration: 0 … 10 mg/m³ / 0 … 200 mg/m³, Higher measuring ranges on request
- Certified measuring ranges Scattered light intensity: 0 … 100 SI / 0 … 15 SI / 0 … 50 SI / 0 … 200 SI
- Response time (t90): 1 s … 600 s, Freely adjustable
- Accuracy: ≤ 2 %, Of measuring range full scale
- Process temperature: –40 °C … +600 °C
- Process pressure:
With MCU-P control unit: –50 hPa … 2 hPa
With external purge air unit: –50 hPa … 30 hPa
- Process gas humidity: Non-condensing
- Duct diameter: ≥ 500 mm
- Conformities: Approved for plants requiring approval
2001/80/EC (13. BImSchV)
2000/76/EC (17. BImSchV)
27. BImSchV
TA-Luft (Prevention of Air Pollution)
EN 15267
EN 14181
MCERTS
2010/75/EU
- Electrical safety: CE
- Test functions:
Automatic self-test (linearity, contamination, drift, aging)
Contamination limit values: warning at 20%, fault at 30%
Manual linearity test with reference filter
Dimensions:
Connection diagram: