At a glance:
- In-situ gas analyzers Zirkor200
- SICK’s ZIRKOR200 gas analyzer provides very robust, reliable, and suitability-tested oxygen measurement for small and large combustion plants
- Electrochemical cell with extremely long service life due to innovative protection mechanisms
- Self-monitoring electrochemical cell
- Fully automated adjustment mechanism integrated into the control unit
- Version for high temperatures available
- ZIRKOR remote app for remote access to the analyzer
- Very short response time
- Suitability-tested according to EN 15267
- Ex version for ATEX/IECEx, Zone 1 and Zone 21
- Incineration optimization
- Oxygen monitoring for process control
- Oxygen reference value for emission measurement
- Monitoring of inert gas atmospheres
Please note: The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications
Technical data:
ZIRKOR200 analyzer unit standard version
- Measured values: O2
- Performance-tested measurands: O2
- Measurement principles: Zirconium dioxide sensor
- Measuring ranges: 0 … 25 Vol.-%
- Certified measuring ranges:
O2: 0 … 25 Vol.-%
- Response time (t90): 5 s, Depending on sample gas flow
- Accuracy: ± 0.5 %, Of the measured value or 0.02% by O2 volume, with the higher value being valid
- Process temperature:
- Measuring probe: ≤ +600 °C
- Measuring probe with protective tube: ≤ +1,600 °C
- Process pressure: –100 hPa … 100 hPa, Maximum pressure fluctuation: ± 50 hPa
- Process gas velocity: ≤ 50 m/s
- Ambient temperature: –40 °C … +80 °C
- Conformities:
EN 15267
2000/76/EC (17. BImSchV)
2001/80/EC (13. BImSchV)
27. BImSchV
30. BImSchV
TA-Luft (Prevention of Air Pollution)
- SIL:
Safety integrity level: SIL 2 (IEC 61508)
Systematic capability: SC 2 (IEC 61508)
- Device type: Type B
- Operating mode: Low demand
- System architecture: 1oo1 voting
- Comment: Option
- Electrical safety: CE
- Enclosure rating: IP65
- Dimensions (W x H x D): Dimensions may vary. For details, see the dimensional drawings.
- Immersion depth:
Measuring probe: ≤ 3,682 mm
Measuring probe with protective tube: ≤ 1,000 mm
- Material in contact with media: Stainless steel 1.4571
- Material: Stainless steel 1.4571
- Options:
Protective tube
LongLife cell
LongLife² cell
Dimensions:
Connection diagram: