- k-Value: 0 – 10,00 m-1
- Density: 0 – 100%
- Soot mass concentration: 0 – 844 mg/m3
- RPM: 360 – 8000 min-1
- Oiltemperature: 0 – 150 °C
- Operation Temperature: 5 – 45 °C
- Calibration: automatically(Light-Dark-Test)
- Operating Voltage: 230 V/50 Hz; 12 V DC
- Interfaces: Bluetooth/ RS 232
- Dimensions(B x H x T): 585 mm x 230 m x 161 mm
- Mass: ca. 10 kg
Exhaust Gas Analyser Opacilyt 1030
- Compact workshop instrument for performing the AU on diesel vehicles
- with speed sensing for conventional vehicles
- with the Bluetooth OBD module for modern OBD vehicles
- Future proof for Euro 6 vehicles
- Opacilyt 1030 and OBD interface of the vehicle are connected to the PC / laptop
- AU software with integrated AU target database also available for commercial vehicles
At a glance:
- OBD-Module Bluetooth
Extension for wireless AU with the OBD module BT 02 for cars and trucks to communicate with the vehicle connected via Bluetooth to a PC / Notebook
- OBD – Protocols
ISO DIS 14230-4 (kW 2000)
ISO 9141-2
SAE J1850 (Modi PWM und VPM)
ISO DIS 15765-4 (CAN)
SAE J1939
WWH ISO 27145
Technical data:
- k-Value: 0 – 10,00 m-1
- Density: 0 – 100%
- Soot mass concentration: 0 – 844 mg/m3
- RPM: 360 – 8000 min-1
- Oiltemperature: 0 – 150 °C
- Operation Temperature: 5 – 45 °C
- Calibration: automatically(Light-Dark-Test)
- Operating Voltage: 230 V/50 Hz; 12 V DC
- Interfaces: Bluetooth/ RS 232
- Dimensions(B x H x T): 585 mm x 230 m x 161 mm
- Mass: ca. 10 kg
You can download more at the document here: Download
Related products
Hot-wet Extractive gas analyzers
- CEMS solutions MCS100FT
- The FTIR measuring principle allows the simultaneous determination of more than 12 measuring components – tailor-made for the particular requirements of the customer.
- Lowest approved HF measuring range: 0 ... 3 mg/m³
- Automatic spectrum adjustment via AutoVAL for reliable measuring values
- Approved according to EN 15267
- Emission monitoring in waste incineration plants
- Effective HF limit value monitoring, e. g., in aluminum production
- Monitoring of gaseous emissions in cement plants or power stations
Scattered light dust Measuring Devices
- The DUSTHUNTER SB30 is a measuring device, designed to detect very low to moderate dust concentrations, such as in hot or volatile gases
- Automatic check of zero and reference point
- Emissions monitoring in industrial plants including, for example, power plants, heating systems, waste incineration plants, in steel production, and in cement plants
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurements in flue gas ducts upstream and downstream of dust filters
Exhaust Gas Analyser
- Exhaust gas measurement for diesel and petrol engines
- Seperate NO and NO2 measurement
- Measurement of RPM and Oiltemp
- Conversion to reference oxygen value
- Values displayed as volume or mass concentration
- According to OIML Class 1
Scattered light dust Measuring Devices
- The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas
- For very low to medium dust concentrations
- Gas sampling and return combined in one probe
- Contamination check
- Monitoring of wet gas scrubbing facilities
- Measurement in saturated gas downstream of desulfurization plants
- Determination of dust concentrations in wet exhaust air and in technological processes
Hot-wet Extractive gas analyzers
- CEMS solutions MCS200HW
- The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
- Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
- Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
- Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
- SO3 monitoring in coal-fired power plants
