At a glance:
- CEMS solutions MCS100E HW
- Measured values: CH4, CO, CO2, H2O, HCl, N2O, NH3, NO, NO2, O2, SO2
- The MCS100E HW is an analyzer system for the extractive measurement of up to 8 IR active gas components.
- Additional oxygen and total hydrocarbon analyzer as option
- Gas lines heated throughout
- Sample gas infeed on gas sampling probe or analyzer
- Back-purging of gas sampling probe for filter cleaning
- Rapid measured gas exchange to minimize adsorption and desorption processes
- Emission monitoring in waste incineration plants
- Monitoring of incinerators with secondary fuels
- Flue gas monitoring in cement plants
- Emission monitoring in refineries
- Emission monitoring of land-based, heavy fuel fired diesel engine power plants
Please note: The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications
Technical data:
MCS100E HW system
- Measured values: CH4, CO, CO2, H2O, HCl, N2O, NH3, NO, NO2, O2, SO2
- Performance-tested measurands: CO, CO2, H2O, HCl, NH3, NO, O2, SO2
- Measurement principles: Interference filter correlation, Gas filter correlation, Zirconium dioxide sensor
- Gas flow rate: 200 l/h … 1,000 l/h (Depending on application)
- Measuring ranges:
CH4: 0 … 70 ppm / 0 … 1,400 ppm
CO: 0 … 60 ppm / 0 … 2,000 ppm
CO2: 0 … 25 Vol.-% / 0 … 100 Vol.-%
H2O: 0 … 1 Vol.-% / 0 … 40 Vol.-%
HCl: 0 … 10 ppm / 0 … 1,900 ppm
NH3: 0 … 30 ppm / 0 … 660 ppm
NO: 0 … 150 ppm / 0 … 1,900 ppm
NO2: 0 … 50 ppm / 0 … 500 ppm
N2O: 0 … 50 ppm / 0 … 1,000 ppm
O2: 0 … 1 Vol.-% / 0 … 21 Vol.-%
SO2: 0 … 25 ppm / 0 … 5,000 ppm
Other measuring ranges on request
- Certified measuring ranges:
CO: 0 … 75 mg/m³
CO2: 0 … 20 Vol.-%
H2O: 0 … 40 Vol.-%
HCl: 0 … 15 mg/m³
NH3: 0 … 20 mg/m³
NO: 0 … 200 mg/m³
O2: 0 … 21 Vol.-%
SO2: 0 … 75 mg/m³
Dimensions:
Connection diagram: