- Valve Actuation: Solenoid
- Body Material: Aluminum
- Media: Air, Inert Gas, Liquid Propane Gas, Natural Gas, Oxygen
- Pipe / Port Size: ¾ “; 1 “; ¼ “; ½ “; 2 “; ½ “; 3 “
- Port Type: NPTF
- Function: 2 way – 2/2 Normally Closed, 2 way – 2/2 Normally Open
- Flow: From 6.0 Cv to 14.0 Cv;Over 14.0 Cv, From 5.19 to 12 Kv;Over 12 kv
- Voltage: 110 AC;115 AC;12 DC;120 AC;120 DC;208 AC;220 AC;230 AC;24 AC;24 DC;240 AC;240 DC;440 AC;48 DC;480 AC;6 DC | 50/60
- Max Differential / Max Operating Pressure: Hazardous; Indoor; Outdoor
- Operating Environment: Hazardous, Indoor, Outdoor
ASCO Series 214 Solenoid Valves
- Valve Actuation: Solenoid
- Body Material: Aluminum
- Media: Air, Inert Gas, Liquid Propane Gas, Natural Gas, Oxygen
- The ASCO Series 214 gas shutoff valves are specifically designed for on-off control of fuel gas in commercial and industrial gas burners.
- Broad ambient range of -40°F to 140°F is ideally suited for frigid and hot environments
Categories: Pilot Valves, General Service Valves, Explosion Proof Valves
Tag: test
At a glance:
- The ASCO Series 214 gas shutoff valves are specifically designed for on-off control of fuel gas in commercial and industrial gas burners.
- Their unique double-disc design with over travel provides redundant sealing for leak-tight shutoff on pilot or main gas lines.
- A double-solenoid gas train provides an exceptionally small footprint for space constrained applications.
- The valves are ideal for natural gas fired boilers, furnaces, grain dryers, kilns, gas generators and commercial kitchen/cooking equipment.
Features:
- Low pressure drop and extremely high flow capacity make the valve ideal in low gas supply pressure applications and locations
- Visual indication of open and shut position meets NFPA and FM requirements for visual indication
- Proof of closure switch meets agency/code requirements for an electrical interlock of valve closed position
- 1/8-inch NPT pipe taps with plugs provide easier routine testing
- Broad ambient range of -40°F to 140°F is ideally suited for frigid and hot environments
- Optional NPT threaded flange adapters allow direct piping that simplifies installation and maintenance
- Silicon-free constructions are available for painting/finishing applications
- Most constructions available on ASCO SameDay or 5Day shipping program to keep production lines running smoothly
You can download more at the document here: Download
Related products
Signal isolation
- The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.
- Input signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
- Output signal (calibrated switchable): 0 … 20 mA, 0 … 10 V, 0 … 5 V/ 4 … 20 mA, 2 … 10 V, 1 … 5 V
- The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary
Signal isolation
- Input mA: -1 to +50 mA
- Input impedance: 10 Ω
- Adjustments – Zero: Any value within range limits
- Adjustments – Minimum spans: 0,4 mA
- Output: 4-20 / 20-4 mA
- Galvanic isolation: 1500 VAC, 1 min
- Power supply: 7,5 to 36 VDC
- Typical accuracy: ±0,1 % of span
Exhaust Gas Analyser
- Compact workshop instrument for performing the AU on diesel vehicles
- with speed sensing for conventional vehicles
- with the Bluetooth OBD module for modern OBD vehicles
- Future proof for Euro 6 vehicles
- Opacilyt 1030 and OBD interface of the vehicle are connected to the PC / laptop
- AU software with integrated AU target database also available for commercial vehicles
Scattered light dust Measuring Devices
- The DUSTHUNTER SB50 is a measuring device for dust at low to medium concentrations in challenging applications, e. g., in hot or corrosive gases
- For low to medium dust concentrations
- Emission monitoring of heating installations
- Monitoring of dust concentrations downstream of filter plants
- Dust concentration measurement in cement plants
Hot-wet Extractive gas analyzers
- CEMS solutions MCS100FT
- The FTIR measuring principle allows the simultaneous determination of more than 12 measuring components – tailor-made for the particular requirements of the customer.
- Lowest approved HF measuring range: 0 ... 3 mg/m³
- Automatic spectrum adjustment via AutoVAL for reliable measuring values
- Approved according to EN 15267
- Emission monitoring in waste incineration plants
- Effective HF limit value monitoring, e. g., in aluminum production
- Monitoring of gaseous emissions in cement plants or power stations