Steel Cord Conveyor Belts

PIPEX E PIFLEX® SIG

  • Pipex and Piflex are rubber conveyor belts designed for tubular conveyor systems equipped with a Textile or a Steel Cord carcass, respectively.
  • Wear resistant
  • Oil resistant
  • Heat resistant

Hot-wet Extractive gas analyzers

Extractive gas analyzers MCS100FT

  • CEMS solutions MCS100FT
  • The FTIR measuring principle allows the simultaneous determination of more than 12 measuring components – tailor-made for the particular requirements of the customer.
  • Lowest approved HF measuring range: 0 ... 3 mg/m³
  • Automatic spectrum adjustment via AutoVAL for reliable measuring values
  • Approved according to EN 15267
  • Emission monitoring in waste incineration plants
  • Effective HF limit value monitoring, e. g., in aluminum production
  • Monitoring of gaseous emissions in cement plants or power stations

Transmittance dust Measuring Devices

Transmittance dust measuring devices DUSTHUNTER T100

  • The DUSTHUNTER T100 is a measuring device for dust at medium to high concentrations
  • For medium to high dust concentrations
  • Emissions monitoring at power plants and waste incineration plants
  • Easy installation, commissioning and operation
  • Measurement independent of gas velocity, humidity and particle charge
  • Low maintenance due to self-monitoring

Transmittance dust Measuring Devices

Transmittance dust measuring devices DUSTHUNTER T200

  • The DUSTHUNTER T200 is a measuring device for dust at medium to high concentrations
  • For medium to high dust concentrations
  • Emissions monitoring at power plants and waste incineration plants
  • Monitoring of filter systems
  • Monitoring of dust load in factory halls
  • Control of fresh air and exhaust air units

Transmittance dust Measuring Devices

Transmittance dust measuring devices C200

  • The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles of transmittance and forward scattered light
  • Combination of transmittance and scattered light measurement
  • For very low to high dust concentrations
  • For medium to large duct diameters
  • Emissions monitoring at power plants and waste incineration plants
  • Monitoring of filter systems
  • Measurement of dust concentration in exhaust gas and exhaust air ducts upstream and downstream of filters

Scattered light dust Measuring Devices

Scattered light dust measuring devices DUSTHUNTER SB30

  • The DUSTHUNTER SB30 is a measuring device, designed to detect very low to moderate dust concentrations, such as in hot or volatile gases
  • Automatic check of zero and reference point
  • Emissions monitoring in industrial plants including, for example, power plants, heating systems, waste incineration plants, in steel production, and in cement plants
  • Monitoring of dust concentrations downstream of filter plants
  • Dust concentration measurements in flue gas ducts upstream and downstream of dust filters

Scattered light dust Measuring Devices

Scattered light dust measuring devices DUSTHUNTER SB50

  • The DUSTHUNTER SB50 is a measuring device for dust at low to medium concentrations in challenging applications, e. g., in hot or corrosive gases
  • For low to medium dust concentrations
  • Emission monitoring of heating installations
  • Monitoring of dust concentrations downstream of filter plants
  • Dust concentration measurement in cement plants

Scattered light dust Measuring Devices

Scattered light dust measuring devices DUSTHUNTER SB100

  • Measurement independent of gas velocity, humidity and particle charge
  • Approved according to EN 15267
  • For medium to large duct diameters
  • Emission monitoring of power stations and waste incineration plants
  • Monitoring of dust concentrations downstream of filter plants
  • Monitoring of dust loads in factory workshops
  • Control of fresh air supplies and exhaust air plants

Scattered light dust Measuring Devices

Scattered light dust measuring devices DUSTHUNTER SP30

  • The DUSTHUNTER SP30 is a measuring device which reliably detects very low to high dust content
  • Emission monitoring which does not require permission in industrial systems
  • Dust concentration measurements in exhaust gas ducts
  • Monitoring of cloth filters for defective filter bags
  • Ideal for monitoring electrostatic precipitators
  • Dust monitoring in grinding and dosing systems
  • Monitoring and regulation of fresh air and exhaust air systems

Scattered light dust Measuring Devices

Scattered light dust measuring devices DUSTHUNTER SP100

  • The DUSTHUNTER SP100 is a type-approved measuring device with probe for very low to medium dust concentrations
  • For very low to medium dust concentrations
  • For small to medium duct diameters
  • Emissions monitoring at power plants and waste incineration plants
  • Monitoring of filter systems
  • Measurements in exhaust gas or exhaust ventilation ducts

Scattered light dust Measuring Devices

Scattered light dust measuring devices FWE200DH

  • The FWE200DH dust measuring device is designed to continuously measure dust concentrations in wet flue gas
  • For very low to medium dust concentrations
  • Gas sampling and return combined in one probe
  • Contamination check
  • Monitoring of wet gas scrubbing facilities
  • Measurement in saturated gas downstream of desulfurization plants
  • Determination of dust concentrations in wet exhaust air and in technological processes

Hot-wet Extractive gas analyzers

Extractive gas analyzers MCS200HW

  • CEMS solutions MCS200HW
  • The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
  • Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
  • Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
  • Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
  • SO3 monitoring in coal-fired power plants