Hot-wet Extractive gas analyzers
- CEMS solutions MCS100FT
- The FTIR measuring principle allows the simultaneous determination of more than 12 measuring components – tailor-made for the particular requirements of the customer.
- Lowest approved HF measuring range: 0 ... 3 mg/m³
- Automatic spectrum adjustment via AutoVAL for reliable measuring values
- Approved according to EN 15267
- Emission monitoring in waste incineration plants
- Effective HF limit value monitoring, e. g., in aluminum production
- Monitoring of gaseous emissions in cement plants or power stations
In-situ gas analyzers
- In-situ gas analyzers GM32
- The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3
- No gas sampling, no gas transport, no gas conditioning
- Up to eight measuring components at the same time, plus process temperature and pressure
- DOAS and CDE evaluation process
- Numerous independent measuring ranges with consistent accuracy
- Automatic self-test function (QAL3) without test gases
- Overpressure encapsulated design for ATEX Zones 1 and 2
- For monitoring and control in flue gas purification,such as denitrification plants, desulfurization plants and converters
- Emissions monitoring according to EU directives or local regulations
- TRS emissions monitoring in the Kraft pulp industry.
In-situ gas analyzers
- In-situ gas analyzers GM35
- Simultaneous or as individual measurement: the GM35 gas analyzer measures CO2, H2O and CO, or N2O, as well temperature and pressure
- No gas sampling and conditioning
- Gas testable version of measuring probe available
- Emission monitoring according to EN 14181, e. g., in power or cement plants
- Monitoring of the combustion efficiency in hazardous waste incineration
- Process monitoring in urea production
In-situ gas analyzers
- In-situ gas analyzers Zirkor200
- SICK’s ZIRKOR200 gas analyzer provides very robust, reliable, and suitability-tested oxygen measurement for small and large combustion plants
- Electrochemical cell with extremely long service life due to innovative protection mechanisms
- Fully automated adjustment mechanism integrated into the control unit
- ZIRKOR remote app for remote access to the analyzer
- Suitability-tested according to EN 15267
- Ex version for ATEX/IECEx, Zone 1 and Zone 21
- Oxygen monitoring for process control
- Monitoring of inert gas atmospheres
In-situ gas analyzers
- In-situ gas analyzers GM700
- The GM700 is able to measure several gas components, such as NH3, HF, HCl or H2O
- High selectivity due to high spectral resolution
- Overpressure encapsulated design for ATEX Zone 2
- Ammonia slip measurement in DeNOx plants
- Emission monitoring of hydrogen fluoride in aluminum smelters
- Ammonia measurement in exhaust gas of combustion engines
- Ammonia measurement in composting or waste incineration plants
- HCI measurement in combustion plants
Cold-dry Extractive gas analyzers
- Extractive gas analyzers GMS800
- Measured values: Ar, CH4, CH3OH, C2H2, C2H2F4, C2H4, C3H6, C3H8, C4H6, Cl2, CO, CO2, COCl2, COS, CS2, H2, H2S, He, NH3, NO, N2O, NO2, O2, SF6, SO2, other components on request
- Emission monitoring according to EN 15267 and process gas measurements, including in potentially explosive atmospheres
- Emission monitoring of very low concentrations
- Measurement of smallest concentrations of NO, NO2, and SO2
- NOx monitoring by direct measurement of NO and NO2
- Measurement of sulfur compounds in process gases
- CO monitoring for explosion protection
- Measurement of smallest concentrations in hydrogen or hydrocarbons
Cold-dry Extractive gas analyzers
- Extractive gas analyzers S700
- Measured values: Ar, CBrF3, CClF3, CCl2F2, CCl3F, CHClF2, CHCl3, CH2Cl2, CH2O, CH3Cl, CH3OH, (CH3)2O, CH4, CO, CO2, CS2, C2Cl2F4, C2Cl3F3, C2Cl4, C2HCl3, C2H2, C2H2Cl2, C2H2F4, C2H3Cl3, C2H4, C2H4Cl2, C2H5OH, C2H6, C3H4, C3H6, C3H7OH, C3H8, C3H8O2, C4H6, C4H8, C4H10, C4H8O, C4H9OH, C5H12, C6H10O, C6H12, C6H14, C7H16, C7H8, C8H10, He, H2, H2O, NH3, NO, N2O, O2, SF6, SO2
- S710 19" rack for analyzer cabinets and standard applications
- S715 wall-mounting enclosure for harsh application conditions and zone 2 explosive environment (ATEX)
- S720 flame-proof housing for zone 1 explosive environment (ATEX)
Cold-dry Extractive gas analyzers
- The SIDOR is a gas analyzer for measurement of up to 2 infrared components
- Paramagnetic or electrochemical O2 measurement
- Automated adjustment with component-free ambient air
- Emission monitoring according to 13th (2001/80/EC) and 27th German Federal Emission Protection Directive (BImSchV).
- Combustion optimization of small boilers
- Monitoring of landfill gas and bio fermenters
- Operational measurements in power stations
Hot-wet Extractive gas analyzers
- CEMS solutions MCS100E HW
- Measured values: CH4, CO, CO2, H2O, HCl, N2O, NH3, NO, NO2, O2, SO2
- The MCS100E HW is an analyzer system for the extractive measurement of up to 8 IR active gas components.
- Emission monitoring in waste incineration plants
- Monitoring of incinerators with secondary fuels
- Flue gas monitoring in cement plants
- Emission monitoring in refineries
- Emission monitoring of land-based, heavy fuel fired diesel engine power plants
Hot-wet Extractive gas analyzers
- CEMS solutions MCS200HW
- The MCS200HW is a multi-component analyzer system for continuous monitoring of up to 10 IR measurement components in flue gases of industrial combustion plants
- Measured values: CH4, CO, CO2, Corg, HCl, H2O, H2SO4, NH3, NO, NO2, N2O, O2, SO2, SO3
- Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g. cement plants
- Measurement of nitrogen oxides (NO, NO2, N2O) in nitric acid plants
- SO3 monitoring in coal-fired power plants
